MetalCloak Grade-8 Suspension Hardware Upgrade Kit for 07-18 Jeep Wrangler JK, JKU 7701
SKU
MTK-7701
We Price Match
- Part: Suspension - Miscellaneous
- Manufacturer: MetalCloak
MetalCloak's Jeep JK Wrangler Full Replacement Suspension Hardware Kit for is an 82 piece kit that features replacement hardware for all Control Arms, Front/Rear Track Bars and Lower Shock Mounts.
Special Price $246.46 Regular Price $289.95
Metalcloack 7701
MetalCloak's Jeep JK Wrangler Full Replacement Suspension Hardware Kit for is an 82 piece kit that features replacement hardware for all Control Arms, Front/Rear Track Bars and Lower Shock Mounts.
Full Replacement Suspension Hardware Kit from MetalCloak is what you need to replace your worn out fasteners. MetalCloak's Patented Duroflex Control Arms do not put the stresses on stock hardware like typical suspension kits do, so it is possible to re-use all your stock hardware. If your JK has old, worn out, or mother nature has played havoc with your stock hardware, this kit is your ultimate solution.
MetalCloak's Jeep JK Wrangler Full Replacement Suspension Hardware Kit for is an 82 piece kit that features replacement hardware for all Control Arms, Front/Rear Track Bars and Lower Shock Mounts.
Full Replacement Suspension Hardware Kit from MetalCloak is what you need to replace your worn out fasteners. MetalCloak's Patented Duroflex Control Arms do not put the stresses on stock hardware like typical suspension kits do, so it is possible to re-use all your stock hardware. If your JK has old, worn out, or mother nature has played havoc with your stock hardware, this kit is your ultimate solution.
Fitment:
07-18 Jeep Wrangler JK07-18 Jeep Wrangler JK Unlimited
Features:
Works For JK WranglersControl Arm Hardware
Grade 8 Bolts (14)
Washers (22)
Nuts (8)
Flag Nuts (6)
Track Bar Hardware
Grade 8 Bolts (4)
Washers (8)
Nuts (4)
Shock Mount Hardware
Grade 8 Bolts (4)
Washers (8)
Nuts (4)
Gold Zinc Hardware
Parts Included:
Control Arm HardwareGrade 8 Bolts (14)
Washers (22)
Nuts (8)
Flag Nuts (6)
Track Bar Hardware
Grade 8 Bolts (4)
Washers (8)
Nuts (4)
Shock Mount Hardware
Grade 8 Bolts (4)
Washers (8)
Nuts (4)
Notes:
Note: This item is considered a builder part, as such there are no instructions for the use of these products; if using any of the builder parts you should be confident of your mechanical skill level and know that you will use at your own risk.
Note: MetalCloak recommends you have a suspension specialist align your truck once MetalCloak suspension is installed.
| Searchable Sku | 7701 |
|---|---|
| Bulk Item Surcharge | $0.00 |
| Manufacturer | MetalCloak |
Write Your Own Review
