Search results for: 'Seatbelts for 1986'

The MetalCloak ARB Single Compressor Mount is engineered to provide a mounting location for the ARB single compressor for the Jeep JK Wrangler. Learn More

This kit is for use with the VIAIR 2-1/2 gal. Air Tank if you are not using air lockers. Kit contains two 1/4" plugs, one drain petcock, one 1/4" compression fitting, and one 175 PSI rated safety valve. For use with the VIAIR 2-1/2 gallon tank, when not using air lockers Kit contains two 1/4" plugs, one drain petcock, one 1/4" compression fitting and one 175 PSI rated safety valve Learn More

All Viair tanks are SAE J10 certified and rated to either 150 or 200 PSI maximum working pressure and equipped with either 1/4' or 3/8" NPT ports in various configurations. All air tanks are coated to resist rusting and oxidation. Max Pressure: 200 PSI Six 1/4" NPT Ports Dimensions: 23.5" L x 6" W x 7.5" H Rust Resistant Coating Mounting Hardware Included Learn More

Mounts under the front passenger seat while providing maximum protection from damage and from the elements. Allows the manifold and locker solenoids to be mounted next to the compressor for simple hose routing. Learn More

Compact, lightweight and quick installing design; designed to activate two core lockers and core drs, or four air activated devices; sealed, maintenance-free assembly; universal mount for versatile positioning; 12 volts; pressure switch included; wiring harness included Learn More

VIAIR’s Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle 450C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs. Included Parts: - 2.5 Gallon VIAIR Air Tank -... Read More Learn More

400P is a larger portable compressor kit that can inflate up to a 35-inch tire from 0 to 30 PSI in less than 5 minutes. Used and approved of by off road enthusiasts worldwide, the 400P can save you when you’re miles from home. Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. - Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose... Read More Learn More

The Jeep Wrangler JK Compressor bracket includes a comprehensive Installation guide showing detailed instructions on fitting the CKMTA (twin) ARB Compressor with 4L Air Tank and Air Locker Manifold kit with switch and Quick Connect Coupling to the bracket and correct installation of the bracket to the vehicle. Learn More

Adds a second high volume WATERPROOF compressor to the JKOBA to double the output of the system allowing you to air two 37” tires at the same time as well as provide added air volume for air tools. The compressor mounts to existing studs in the JKOBA mounting bracket so no drilling or cutting is required to install the kit. Learn More

Our Bronco Air Compressor Mount & Storage Box provides a convenient and discreet mounting location for your ARB single or twin on-board air system compressor. Learn More