Search results for: 'Willy's Logo Spare Tire Cover for 18-C Jeep Wrangler JL'

400P is a larger portable compressor kit that can inflate up to a 35-inch tire from 0 to 30 PSI in less than 5 minutes. Used and approved of by off road enthusiasts worldwide, the 400P can save you when you’re miles from home. Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. - Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose... Read More Learn More

400P-Automatic is VIAIR’s first Automatic shut-off function portable compressor. This 33% duty cycle unit is capable of pressures up to 150 PSI and can be operated for up to 40 minutes at a time before needing to be rested (at up to 40 PSI). The 400P-Automatic comes with a close-ended gas station-style air gun for added convenience. Portable compressors with automatic shutoff come into play when moving from tire to tire, and when checking tire pressure in the middle of a tire fill. A typical... Read More Learn More

440P is the ultimate portable compressor kit. It can inflate a 37-inch tire from 0 to 30 PSI in less than 5 minutes. The 440P is the largest and most powerful portable compressor kit available today. Learn More

450P-Automatic offers an automatic shut-off function in a larger portable compressor. This 100% duty cycle unit is capable of pressures up to 150 PSI and can be operated for up to 40 minutes at a time before needing to be rested. The 450P-Automatic comes with a close-ended gas station-style air gun for added convenience. Portable compressors with automatic shutoff come into play when moving from tire to tire, and when checking tire pressure in the middle of a tire fill. A typical portable... Read More Learn More

VIAIR’s Ultra Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 480C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft.... Read More Learn More

VIAIR’s X’treme Duty Onboard Air System is a pre-packaged compressed air solution that provides two 350C, 100% duty cycle compressors, a 2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for... Read More Learn More

Adds a second high volume WATERPROOF compressor to the JKOBA to double the output of the system allowing you to air two 37” tires at the same time as well as provide added air volume for air tools. The compressor mounts to existing studs in the JKOBA mounting bracket so no drilling or cutting is required to install the kit. Learn More

Includes fully assembled and tested 12 volt compressor, complete wiring loom with air locker solenoid plug-in contacts, switches, air filter, mounting hardware, and comprehensive photo-illustrated installation guide. Learn More

This kit is for use with the VIAIR 2-1/2 gal. Air Tank if you are not using air lockers. Kit contains two 1/4" plugs, one drain petcock, one 1/4" compression fitting, and one 175 PSI rated safety valve. For use with the VIAIR 2-1/2 gallon tank, when not using air lockers Kit contains two 1/4" plugs, one drain petcock, one 1/4" compression fitting and one 175 PSI rated safety valve Learn More

All Viair tanks are SAE J10 certified and rated to either 150 or 200 PSI maximum working pressure and equipped with either 1/4' or 3/8" NPT ports in various configurations. All air tanks are coated to resist rusting and oxidation. Max Pressure: 200 PSI Six 1/4" NPT Ports Dimensions: 23.5" L x 6" W x 7.5" H Rust Resistant Coating Mounting Hardware Included Learn More