Search results for: 'Jeep rubicon 202'

Fast-Fill 200 PSI Air Source Kits come with a powerful, low amp-draw 380C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry’s leading 200 PSI compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8" (I.D.) air line pre-installed! To use, simply connect the pressure switch to fused power, make a solid... Read More Learn More

High-Flow 200 PSI Air Source Kits come with a powerful, low amp-draw 480C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry’s leading 200 PSI compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8" (I.D.) air line pre-installed! To use, simply connect the pressure switch to fused power, make a solid... Read More Learn More

Custom designed to work with VIAIR Compressors, this hookup kit includes a Pressure Switch with Built-in Relay and an illuminated dash panel gauge with built-in ON/OFF switch. Also comes with 20 ft. of positive extension wire, 20 ft. of air delivery line tubing, as well as every part you will need to hook up to an air tank for a multi-purpose onboard air system. Included Parts: (1) Illuminated Dash Panel Gauge (1) 20 Ft. 1/4” O.D. Air Line Tubing (1) Pressure Switch with Built-In Relay (1)... Read More Learn More

This is the same gauge used in our onboard air hookup kits. Utilizing a well-designed, high quality 150 PSI or 200 PSI pressure monitor with built-in ON/OFF switch to activate or deactivate compressors as needed, this gauge kit is perfect for those who already have an onboard air setup. Included Parts: (1) Illuminated Dash Panel Gauge (1) 20 Ft. Lead Wire with Inline Fuse (1) 1/8” (F) NPT Compression Fitting (3) Insulated Female Terminal Connectors (2) Insulated Male Terminal Connectors (2)... Read More Learn More

400H is a hardmount compressor that pumps a massive 2.54 CFM flow at zero PSI head pressure. The 400H comes with a built-in, moisture resistant ON/OFF power switch. Features include a heavy duty stainless steel leader hose with a 1/4” quick connect stud for hookup to a coil hose and insulated wiring for simple installation. Included Parts: - Check Valve - Vibration Isolators - Mounting Hardware - 1/4" Quick Connect Stud - Stainless Steel Braided Leader Hose - Air Line for Remote Mount Air... Read More Learn More

400P-RV Automatic offers automatic shut-off in a larger portable compressor kit that can inflate 35-inch tires from 0 to 30 PSI in less than 5 minutes. While the unit is intended for RV use, it can be used for virtually any tire since it comes with more accessories for more varied inflating situations than any other portable compressor kit on the market today. Portable compressors with automatic shutoff come into play when moving from tire to tire, and when checking tire pressure in the middle... Read More Learn More

Heavy Duty Pressure Switches - are sealed for moisture resistance and come with 1/4” NPT Male Port Fittings unless otherwise noted. 1/8" Male NPT Port 1/4" Spade Connectors 85 PSI On, 105 PSI Off) Learn More

Keep your tank safe and out of the way. Easily accessible and keeps your Comp-Air Compact Air System safe out of the way. It mounts to your roll bar. Learn More

Ultra Light Duty Onboard Air System can be used to pressurize the included 1.0 gallon air tank for air horn use, off road air locking differential use, and a host of other light duty pneumatic needs. While not intended to inflate tires, this onboard air system provides a reliable smaller volume, in a cost effective package. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended... Read More Learn More

VIAIR’s Ultra Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 480C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft.... Read More Learn More