Search results for: 'Form 206 has been activated for you.  Please fill it and submit when done'

120 PSI Air Source Kits come with a low amp-draw, 25% duty cycle, 275C VIAIR compressor mounted on a 150 PSI-rated 1.5 gallon air tank with 5 ports. All Air Source kits come with a pre-wired pressure switch (P/N 20003 / 90-120 PSI). The 120 PSI Air Source Kit comes complete with a 1/4” NPT brass drain cock, 1/4” NPT ASME coded and certified safety valve, 1/2” NPT port compression fitting for 3/8” (I.D.) air line pre-installed. To use, simply connect the pressure switch to fused power,... Read More Learn More

This compact vehicle mounted compressor has been designed to do everything! Activate your ARB Air Locking Differentials, air up a 35" tire in less than a minute and run air tools. This 100% duty cycle, 6.16 CFM compressor is built to support all of your compressed air needs. The CKMTA12 and CKMTA24 twin on-board compressor kits were designed to fill the off road markets need for a compact sized yet high-volume compressed air source to suit the high volume airflow needs of most air powered... Read More Learn More

Features a normally-closed air chuck that can be opened by pressing the lever on the inflation gun. Because this air chuck is normally closed, the Tire Inflation Gun is a perfect compliment to onboard air systems and VIAIR’s line of “Portable Automatic” compressors. Learn More

For use with ARB Air Compressor #73252. Learn More

This kit is for use with the VIAIR 2-1/2 gal. Air Tank if you are not using air lockers. Kit contains two 1/4" plugs, one drain petcock, one 1/4" compression fitting, and one 175 PSI rated safety valve. For use with the VIAIR 2-1/2 gallon tank, when not using air lockers Kit contains two 1/4" plugs, one drain petcock, one 1/4" compression fitting and one 175 PSI rated safety valve Learn More

All Viair tanks are SAE J10 certified and rated to either 150 or 200 PSI maximum working pressure and equipped with either 1/4' or 3/8" NPT ports in various configurations. All air tanks are coated to resist rusting and oxidation. Max Pressure: 200 PSI Six 1/4" NPT Ports Dimensions: 23.5" L x 6" W x 7.5" H Rust Resistant Coating Mounting Hardware Included Learn More

VIAIR’s Medium Duty Onboard Air System is a pre-packaged compressed air solution that provides a 33% duty cycle 325C compressor, 2.5 gallon air tank, and all components needed to install basic vehicle-based pneumatics. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs. Included Parts: - 2.5 Gallon VIAIR Air Tank - 325C VIAIR... Read More Learn More

VIAIR’s Heavy Duty Onboard Air System is a pre-packaged compressed air solution that provides a faster 33% duty cycle 400C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires right out of the box. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs. Included Parts: - 2.5... Read More Learn More

VIAIR’s Super Duty Onboard Air System is a pre-packaged compressed air solution that provides two fast 325C, 33% duty cycle compressors, a 2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for... Read More Learn More

Includes fully assembled and tested 12 volt compressor, complete wiring loom with air locker solenoid plug-in contacts, switches, air filter, mounting hardware, and comprehensive photo-illustrated installation guide. Learn More