Search results for: 'Rubicon Express RE1540 front Brake Line Set for Jeep JK'

For use with ARB Air Compressor #73252. Learn More

VIAIR’s X’treme Duty Onboard Air System is a pre-packaged compressed air solution that provides two 350C, 100% duty cycle compressors, a 2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for... Read More Learn More

This kit is for use with the VIAIR 2-1/2 gal. Air Tank if you are not using air lockers. Kit contains two 1/4" plugs, one drain petcock, one 1/4" compression fitting, and one 175 PSI rated safety valve. For use with the VIAIR 2-1/2 gallon tank, when not using air lockers Kit contains two 1/4" plugs, one drain petcock, one 1/4" compression fitting and one 175 PSI rated safety valve Learn More

All Viair tanks are SAE J10 certified and rated to either 150 or 200 PSI maximum working pressure and equipped with either 1/4' or 3/8" NPT ports in various configurations. All air tanks are coated to resist rusting and oxidation. Max Pressure: 200 PSI Six 1/4" NPT Ports Dimensions: 23.5" L x 6" W x 7.5" H Rust Resistant Coating Mounting Hardware Included Learn More

440P is the ultimate portable compressor kit. It can inflate a 37-inch tire from 0 to 30 PSI in less than 5 minutes. The 440P is the largest and most powerful portable compressor kit available today. Learn More

Includes fully assembled and tested 12 volt compressor, complete wiring loom with air locker solenoid plug-in contacts, switches, air filter, mounting hardware, and comprehensive photo-illustrated installation guide. Learn More

Ultra Light Duty Onboard Air System can be used to pressurize the included 1.0 gallon air tank for air horn use, off road air locking differential use, and a host of other light duty pneumatic needs. While not intended to inflate tires, this onboard air system provides a reliable smaller volume, in a cost effective package. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended... Read More Learn More

VIAIR’s Ultra Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 480C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft.... Read More Learn More

VIAIR’s Medium Duty Onboard Air System is a pre-packaged compressed air solution that provides a 33% duty cycle 325C compressor, 2.5 gallon air tank, and all components needed to install basic vehicle-based pneumatics. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs. Included Parts: - 2.5 Gallon VIAIR Air Tank - 325C VIAIR... Read More Learn More

VIAIR’s Heavy Duty Onboard Air System is a pre-packaged compressed air solution that provides a faster 33% duty cycle 400C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires right out of the box. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs. Included Parts: - 2.5... Read More Learn More