Jeep Part Sales

This wheel spacer is required when mounting a combination of a stock wheel and 35”+ spare tire to the TeraFlex HD carrier & spare tire mounting kit. Size (IN): 1-1/4 Inch Thick Color: Silver Material: Aluminum Learn More

The TeraFlex JK Axle Sleeve and Front Upper Knuckle Gusset Kit is designed to reinforce the weak axle tubing and knuckles on JK Dana 30 or 44 factory axles. This prevents unwanted bending or breaking under extreme conditions. Learn More

The TeraFlex HD44 differential covers are designed to offer extreme protection from rocks, obstacles and other debris on the trail. The TeraFlex differential covers are more than 3/8in. thick. Details: For Use On Dana 44 Front Or Rear Axles Cast From Thick Nodular Iron Black Powder Coat Finish Recessed Bolt Holes Equipped With Filler And Drain Plugs. Fits: TeraCRD50R 2007-2017 Jeep Wrangler JK & Rubicon 2007-2017 Jeep Wrangler Unlimited JK & Rubicon 1997-2006 Jeep... Read More Learn More

The TeraFlex HD60 differential covers are designed to offer extreme protection from rocks, obstacles and other debris on the trail. The TeraFlex differential covers are more than 3/8in. thick. Details: For Use On Dana 50/60 Front Or Rear Axles Cast From Thick Nodular Iron Black Powder Coat Finish Recessed Bolt Holes Equipped With Filler And Drain Plugs. Learn More

Do you have a Hi-Lift Jack, and a RotopaX container? Do you want to carry both on your TeraFlex Alpha Hinged Spare Tire Carrier? This simple bracket bolts to the jack leg and will carry one 2-gallon RotopaX container or two 1-gallon containers. • Fits all 2-door JK Wrangler & 4-door JKU Wrangler Unlimited models. NOTE: • Must be used w/ JK Alpha Hi-Lift Jack Mount Kit (# 4838250). • RotopaX and pack mount are not included. Learn More

Steering arms allow for multiple steering mounting points and positions for custom applications. Steering arms are available for either left or right. Details: Dana 60 Left hand side Learn More

Jeep JK2 and JK4 Front and Rear Rebuild Kit 2007-18 Stock Jeeps use 1 Joint on the Front Driveshaft at the transfer case; 2 Joints on the Rear Driveshaft. Learn More

When a quiet street ride and vibration free driving are required, the rubber bushing ends will give you the feel you want. The rubber bushing will provide the most noise and vibration dampening characteristics possible. This end can also be used as a replacement for any control arm utilizing a 1-1/4” x 12 tpi. ‘heim’ type rod end. Uses a 9/16” bolt. RIGHT Hand Thread. Details: Right hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

The TeraFlex is designed as an upgrade to a current suspension system. Learn More

The replacement 3/4” Lower Stud Kit includes all of the pieces required to replace missing or worn components for your Front Sway Bar Quick Disconnect Kit. • Diameter: 3/4" • Thread: 1/2" X 20 Learn More