Jeep Part Sales

**If using a stock wheel, a wheel spacer #1055005 is required due to the extra thickness of the hinge carrier** The TeraFlex Heavy Duty Adjustable Tire Carrier spreads the load and weight of the tire to more than just one hinge point. Incorporating and using the factory tailgate hinge mounting points spread and separate the load as far apart as possible, resulting in maximum strength and durability. Learn More

Tera has developed heavy duty tie rod ends that utilize a one-ton joint end, and are available in either a stock Jeep taper or a large one-ton taper (standard Dana 60). The stock taper rod ends will fit Dana 30 knuckle holes. The large taper will fit the larger 60 type knuckles, as are used in Tera"™s HD axle line. Additionally the tie rod ends are available with an offset (for use with applications where differential interference may occur with the tie rod). Details: Right hand thread Small... Read More Learn More

Reduces bump steer, front end shimmy, and/or wobble in modified Wrangler models with lifted suspension systems and larger off-road tires. This stabilizer is superior to the factory unit and meets the additional demands and stresses of a modified off-road Jeep. Learn More

The TeraFlex JK/JKU Heavy-Duty Drag Link Kit & Heavy-Duty Tie Rod Kit is designed for extreme conditions that typically cause factory steering components to bend and fail on JK Wrangler and JKU Wrangler Unlimited models. Learn More

The TeraFlex TJ/LJ 5”+ Lift Pro LCG Front Track Bar is designed for TJ Wrangler and LJ Wrangler Unlimited models with 5” or more lift. Learn More

TeraFlex Flex Ends will allow some misalignment when articulating, and have a specially designed urethane bushing to restrict excess movement and allow control and handling at highway speeds. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

Used as replacement in Teraflex 1615700 Monster Lower FlexArms for 84-06 Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ & WJ, Wrangler TJ & Unlimited Details: Right hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

When a quiet street ride and vibration free driving are required, the rubber bushing ends will give you the feel you want. The rubber bushing will provide the most noise and vibration dampening characteristics possible. This end can also be used as a replacement for any control arm utilizing a 1-1/4” x 12 tpi. ‘heim’ type rod end. Uses a 9/16” bolt. LEFT Hand Thread. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

These universal leaf spring mounting plates will allow you to attach leaf springs to custom axles, or to rebuild your stock application. The plates will work with all rear axles, including stock Jeep, Dana 44 & 60. Sold in pairs. Details: Leaf Spring Plates Universal Fit Sold As: Pair Learn More

TeraFlex JK: Suspension Limit Straps are the best way to limit suspension travel and prevent premature drivetrain failure. 15.125" Front & 13.5" Rear (3-4" Lift) Learn More