Air Compressors

Braided Coil Hose with inline inflator/deflator pressure gauge, 3-piece inflation tips kit, quick connect stud, and storage bag. (25ft. hose rated to 200 PSI) For use with portable compressors and “H” model compressors. Learn More

Custom designed to work with VIAIR Compressors, this hookup kit includes a Pressure Switch with Built-in Relay and an illuminated dash panel gauge with built-in ON/OFF switch. Also comes with 20 ft. of positive extension wire, 20 ft. of air delivery line tubing, as well as every part you will need to hook up to an air tank for a multi-purpose onboard air system. Included Parts: (1) Illuminated Dash Panel Gauge (1) 20 Ft. 1/4” O.D. Air Line Tubing (1) Pressure Switch with Built-In Relay (1)... Read More Learn More

300P is a larger portable compressor kit that is capable of inflating up to 33-inch tires easily by simply clamping the power leads to your battery, connecting the tire chuck to the valve stem and turning the unit on. Tire pressure can be checked using the 5-in-1 Inflator/Deflator inline pressure gauge. Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. - Stow when not in use. Never allow the hose to come into contact with the head of... Read More Learn More

VIAIR's 444C Dual Performance Value Pack air compressors feature a newly-developed head assembly, with a patent pending intercooler head, and is capable of a maximum 200 PSI with a 100% duty cycle to power an air suspension system or any other application you may have. The 444C Dual Performance Value Pack includes two 12-volt Chrome or Stealth Black VIAIR 444C air compressors, which are also equipped with a stainless steel braided leader hose with an inline check valve. Note: Use thread... Read More Learn More

Pressure Switches with Built-in Relay - are heavy duty and moisture resistant. They’re been tested to last 10,000+ cycles. They measure 4.25”L x 2.25”W and come with 1/8” male port fittings. Leads are pre-fitted with insulated 1/4” male push-to-connect terminals that are clearly marked for simple installation. 1/8" NPT Male Port 85 PSI On, 105 PSI Off Learn More

Ultra Light Duty Onboard Air System can be used to pressurize the included 1.0 gallon air tank for air horn use, off road air locking differential use, and a host of other light duty pneumatic needs. While not intended to inflate tires, this onboard air system provides a reliable smaller volume, in a cost effective package. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended... Read More Learn More

VIAIR’s Ultra Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 480C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft.... Read More Learn More

120 PSI Air Source Kits come with a low amp-draw, 25% duty cycle, 275C VIAIR compressor mounted on a 150 PSI-rated 1.5 gallon air tank with 5 ports. All Air Source kits come with a pre-wired pressure switch (P/N 20003 / 90-120 PSI). The 120 PSI Air Source Kit comes complete with a 1/4” NPT brass drain cock, 1/4” NPT ASME coded and certified safety valve, 1/2” NPT port compression fitting for 3/8” (I.D.) air line pre-installed. To use, simply connect the pressure switch to fused power,... Read More Learn More

VIAIR's 444C Dual Performance Value Pack air compressors feature a newly-developed head assembly, with a patent pending intercooler head, and is capable of a maximum 200 PSI with a 100% duty cycle to power an air suspension system or any other application you may have. The 444C Dual Performance Value Pack includes two 12-volt Chrome or Stealth Black VIAIR 444C air compressors, which are also equipped with a stainless steel braided leader hose with an inline check valve. Note: Use thread... Read More Learn More

450H is a continuous duty, hardmount compressor intended to directly fill tires or other items using a open-ended coil hose (not included). The 450H comes with a built-in, moisture resistant ON/OFF power switch. Features include a heavy duty stainless steel leader hose with a 1/4” quick connect stud for hookup to a coil hose and insulated wiring for simple installation. Included Parts: - Check Valve - Vibration Isolators - Mounting Hardware - 1/4" Quick Connect Stud - Stainless Steel Braided... Read More Learn More