TeraFlex

The TeraFlex HD30 differential covers are designed to offer extreme protection from rocks, obstacles and other debris on the trail. The TeraFlex differential covers are more than 3/8in. thick. Details: For Use On Dana 25/27/30 Front Axles Cast From Thick Nodular Iron Black Powder Coat Finish Recessed Bolt Holes Equipped With Filler And Drain Plugs. Learn More

Designed to carry up to a 37" tire over the most extreme trails and obstacles, and provide easy and immediate access to the rear cargo area with a single action while spreading the load and weight of the tire to more than just one hinge point. Learn More

TeraFlex JK/JKU Heavy-Duty Ball Joints are engineered to handle the increased load caused by oversized tires and offset wheels. FITS: • JK Wrangler (2-door) w/ Dana 30 or 44 axle • JKU Wrangler Unlimited (4-door) w/ Dana 30 or 44 axle INCLUDES: • Upper ball joints w/out knurl - pair • Lower ball joints w/out knurl - pair Learn More

The angled rod end forging is designed for applications needing additional clearance for tires, or other frame configurations. The Flex joint ends provide excellent off-road capabilities with articulation and durability. They dampen road noise and vibration. The forging uses standard 1-1/4” x 12 tpi. with a 9/16” center bolt. 10 degree angle off joint. Used on our JK Lower Control Arms for better Tire clearance in tight turns. Shoulder width= 2-5/8” Bolt dia.= 9/16” [14mm] Shank angle =... Read More Learn More

Large Rod End Field Repair Tool This repair tool will make joint rebuilding in the field as simple as it gets. This in fact is the same tool that we use in house to rebuild joints. The repair tool is easy to use with two open end wrenches, or sockets. Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

The large 23.5”w x 12”d table is designed to provide maximum use while on the trail, and folds vertical when not in use. The MP table is constructed from lightweight aluminum with stainless steel hardware and is rated for 75 lbs. of evenly distributed load capacity. The table also includes trash bag hooks, and a bottle opener. Multiple slots and holes allow for attaching accessories to the underside of the table. An optional polyethylene cutting board (#4804182) is available separately. Learn More

This brake line extension kit includes all hardware to relocate the rear brake lines allowing more rear axle movement without stressing the brake lines. Designed to fit 2007-current Wrangler and Unlimited models including Rubicon. Details: 2007-14 JK Wrangler, Rubicon and Unlimited Rear Sold as a pair Learn More

Includes 2 SpeedBumps for the front of a vehicle. TeraFlex SpeedBumps are an innovative composite bumpstop system designed for high-speed, high-performance JK Wrangler applications. The maintenance free, performance tuned closed cell micro-cellular polyurethane technology provides a simple installation with no further adjustment or tuning required. Details: SpeedBump Bumpstop Kit Rear Incl. Brackets Speedbumps 3 in. Travel Cylinders Learn More

The TeraFlex JK Outback rear bumper for the JK Wrangler is designed to offer ultimate rock protection, and continue to match the design styling of the vehicle’s body but still offer the protection needed to allow the 4500+ lb. vehicle to push over rocks and obstacles. Learn More