TeraFlex

The TeraFlex TJ disc brake hose kit is required when installing a rear disc brake conversion kit on a TJ Wrangler. This hose kit connects the disc brake kit to the hard brake line mounted to the axle. This kit includes two flexible brake hoses, two brake clips, two banjo bolts, 4 copper washers, and two brake line mounting brackets. Details: Includes brackets and hardware Fits Teraflex disc brake kit Includes: Flex Lines Line Mounts Banjo Bolts Banjo Washers Installation Hardware Learn More

TJ Front and Rear Axle Lower FlexArm Mount- Driver Details: FlexArm Mount Driver Side Front Lower Learn More

TJ Front and Rear Axle Lower FlexArm Mount- Driver Details: FlexArm Mount Passenger Side Front Lower Learn More

The TeraFlex TJ complete 8 FlexArm kit can be added to any existing suspension lift. Learn More

Upgrade your current lift kit with the advantages of long arm performance. The upgrade includes control arm bracketry, and our heavy duty Monster end assemblies with 1.75” DOM arms. The control arm bracketry allows for easy installation. Details: Rear Upper Includes Brackets Hardware For Use with LCG 4 Link System Pair Min Length = 31-9/16" Max Length = 36-3/16" Uses 9/16" [14mm] Bolt 1 1/4-12 UNF Thread 1 1/2" Wrench On Tube 1 7/8" Wrench On Jam Nut Learn More

The TeraFlex S/T Swaybar System is one of the most advanced swaybar disconnect systems available. With its easy engagement knob you can go from street to trail in seconds - literally! The S/T Swaybar System, when engaged, provides a stable highway drive. Disconnected, it allows your vehicle to articulate and your tires to bite despite the terrain. Unlike conventional swaybar disconnects, the S/T bar does not require you to pull, pry and tug on removable links. Details: S/T Single Rate Swaybar... Read More Learn More

These DOT approved stainless steel braided brake lines are designed for most late model Jeep® applications. These stainless line kits will prevent line expansion, thereby giving a much firmer-feeling pedal. Front brake lines come in pairs, measuring 26" for additional brake line length over stock lines. All stainless brake lines are made to MVSS-1006 specifications. Learn More

The HD Oil Pan Skid Plate is another way to protect the underside of your vehicle. It fits all TJ Wranglers from 1997-2006 and is the perfect addition to your other TeraFlex Rock Guard components. It is CNC laser cut from 3/16” steel and powder coated for durability and abrasion resistance. Fits 4.0L 6 cylinder engine only. Details: 4.0L 6 cylinder engine CNC laser cut Powder coated Learn More

Tera has developed heavy duty tie rod ends that utilize a one-ton joint end, and are available in either a stock Jeep taper or a large one-ton taper (standard Dana 60). The stock taper rod ends will fit Dana 30 knuckle holes. The large taper will fit the larger 60 type knuckles, as are used in Tera"™s HD axle line. Additionally the tie rod ends are available with an offset (for use with applications where differential interference may occur with the tie rod). Details: Left hand thread Small... Read More Learn More

Steering arms allow for multiple steering mounting points and positions for custom applications. Steering arms are available for either left or right. Details: Dana 60 Right hand side Learn More