Auto Rust Technicians

Our Safe-T-Cap frame repair kit is designed for a severely rusted frame on the TJ Wrangler. We have found that the frame starts to rust from the inside out, and can create an unsafe condition. Learn More

Rear Upper Trailing Arm Mount Replacement, Left (Driver) Side. Fits 1997-2006 Jeep Wrangler TJ. Our replacement mount is made from Heavy Duty 7 Gauge Steel, CNC Cut and Welded by our Certified Welders! The original factory mount is made from thinner material, making it susceptible to rusting out and tearing away from the frame. The part includes a new high grade bolt and nut welded in place. Learn More

Description: Front trailing arm mounts are located in this area. The boxed frame allows dirt and moisture to collect inside the frame, allowing it to rust from the inside out. This repair kit is heavy gauge steel, CNC cut, bent and precision welded. This part will help improve Safety got you and your jeep. Learn More

Replace that rusted out original with this heavy-duty weldin unit. Factory installed rubber mounts between the body and the rear crossmember accelerate the corrosion process, our heavy-duty unit is the perfect solution. This crossmember ties the two frame rails together and supports the rear of the body and the bumper mounts. Precision CNC cut from heavy gauge steel, meeting or surpassing factory specifications. Learn More

SafeTCap ART-142-S is designed to be direct replacements for the original rear upper coil spring mounts on your Jeep TJ and LJ. The spring plate and the frame mount bracket are made from 11 gage cold rolled steel. There is a pre welded 2.5″ long bump stop mount tube included with an m10-1.5 weld nut. The attached frame mount bracket is made to slip over the frame after removing the old spring mount. Learn More

Our SafeTCap ART-146 is a complete replacement for the original track bar and upper trailing arm bracket mounted on the rear axle. This mount was developed to fit a 2.75 diameter axle, but will work on larger diameter axles. The bracket straddles the sway bar bracket which remains in place during installation. The ART-146 is welded directly to the axle once the old bracket is removed and the surface to be welded is prepared. Our ART-146 bracket is made from 7 gage steel, and is CNC cut, bent,... Read More Learn More

Our ART-143 rear lower coil spring mount for the 1997-2006 Jeep Wrangler TJ/LJ was designed as a direct replacement for your original coil spring mount on the rear axle. This part is to be welded on the rear axle once the original spring mount is removed and the axle is ground down to clean metal. Our ART-143 is made from 7 gage steel and is CNC cut, bent and assembled by our AWS certified welders in the USA. This part is sold individually and is designed to fit both Driver and Passenger... Read More Learn More

Our SafeTCap ART-136 is a replacement for the OEM rear track bar bracket on the Jeep Wrangler TJ. The bracket is made from 7 gauge HRPO steel, CNC cut, bent and MIG welded in the USA facility. The hardware to remount the track bar is included with the bracket. To install this part you will need to disconnect the track bar and you simply cut off the old mount and weld the new mount in the footprint of the old mount. ATTENTION: The SafeTCap ART-136 is designed as an OEM replacement and is not... Read More Learn More

Our SafeTCap® ART-135-1-R Front Frame Section was designed to cap over the passenger side original frame after removing the rotted metal, then welding the new frame repair section to the frame. Learn More

This part is for Right (passenger) side and Fits 1997-2006 Jeep Wrangler TJ. Our kit repairs the rear frame area that ties into the rear crossmember. It is designed to fit over your existing frame after you cut and remove the rotted portions. The part measures 24” long, is made from 11 gauge cold rolled steel, CNC cut and welded by our Certified welders. Learn More