Dana Spicer

FRONT DRIVESHAFT CONSTANT VELOCITY YOKE 1310 U-Joints Non-Greaseable DOES NOT fit 2003 to 2006 RUBICON Models with 1330 series front driveshaft DOES NOT fit aftermarket 1310 CV Driveshaft with FLAT FLANGE at TRANSFER CASE DOES NOT fit OEM or aftermarket 1310 CV Driveshafts originally built with a Greaseable CV Centering yoke Learn More

SPICER U-Joint 1350 Series Heavy-Duty Forged cross Lubeable O.E.M replacement Outside snap ring Cup size = 1.188" Outside to outside = 3.625" Learn More

Manufactured from high-strength nodular iron, Spicer performance differential covers are built to meet the demands of any environment. Don't trust a knock-off to protect your intricate differential parts. Available in Grey or Blue color options. Learn More

This a replacement used for JK Rubicon model Jeeps. Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. Learn More

FRONT DRIVESHAFT CONSTANT VELICITY YOKE 1310 U-Joints Greaseable IF your driveshaft was originally designed for the Greaseable CV Centering yoke then you MUST always use the Greaseable version when replacing the centering yoke. The NON greaseable centering yoke will bind up on the CV Stud Yoke and you will not be able to re-assemble it. IF your driveshaft was originally designed for the NON Greaseable CV centering yoke then you have two choices...one is to use the Greaseable and one is... Read More Learn More

Upgraded Heavy Duty U-Joints Feature A Superior Forged Body With Improved Seals To Prevent Water From Entering The U-Joint. These U-Joints Do Not Have A Lube Channel To Help Prevent Breakage From Today's High Performance Engines And Big Tires. Learn More

Dana Spicer 5-3022-1X Combination Universal Joint Connects Outside Snap Ring 1310 series (5-153X) to Inside "C" Clip GM 3R series (5-3147X) Greaseable Universal Joint - Grease Fitting in body of u-joint This is a very popular and handy u-joint when connecting mismatched driveline components. Learn More

Axles * Dana * 60 * Super Duty 1999 - 2004 Axles * Dana * 60 * Super Duty 2005+ Learn More

Forged Cross O.E.M Replacement Outside Snap Ring Cup Size A= 1.062in. Cup Size B= 1.062in. Outside To Outside= 3.2190in. Most Commonly used in 1945-2006 Jeep CJ & Wrangler Front or Rear Driveshaft U-Joint (153X) 3 7/32" wide from cap to cap Learn More

Dana 35 Spider Gear Kit For Use With 27 C Clip Spline Axles Fit All Ratio Carrier Cases 2-Spider Gears With Shims 2-27 Spline Side Gears With Shims 1-Cross Shaft Retainer Pin 1-Cross Shaft For Use In 1994 And Newer Axles For Use In Open Differential Only Learn More