TeraFlex 3" Suspension Lift Kit With Trackbar Without Shocks For 2007+ Jeep Wrangler JK 4 Door Unlimited 1151220
SKU
TER-1151220
We Price Match
- Manufacturer: TeraFlex
- Part: Lift Kits - Suspension 2-3 Inch
The TeraFlex JK 3” Suspension Lift Kit delivers everything that you need to tackle some serious trails. Drivability and performance are the most important factors that are engineered and built into every
Special Price $1,249.56 Regular Price $1,561.95
Bulk Item Surcharge: $76.95
TeraFlex 1151220
The TeraFlex JK 3” Suspension Lift Kit delivers everything that you need to tackle some serious trails. Drivability and performance are the most important factors that are engineered and built into every TeraFlex lift kit. Properly developed suspension geometry, roll center, and load tuning ensure that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle. TeraFlex kits drive straight and will crawl anything, getting you there and back!
This kit includes 3” lift coil springs, front adjustable track bar, front sway bar disconnects, rear sway bar links, rear track bar bracket, bump stops and all necessary hardware.
This kit will allow you to run up to a 35” tire. Aftermarket wheels with 4.5” backspacing or less are required, or use stock wheels with TeraFlex Offset Wheel Adapters (#1055000 - 2 sets).
Fits all JK Wrangler models including Rubicon and Unlimited.
Note:
This kit must be used with adjustable control arms to establish correct caster and pinion angle during re-alignment.
2012+ JKs require exhaust spacers (#2610000) or other exhaust modification for proper driveline clearance.
This kit does not include shocks; longer shocks will be required.
Driveline modifications may be necessary with this suspension system, or the TeraFlex Rzeppa High Angle CV kit (#1744014) is a perfect solution.
The TeraFlex JK 3” Suspension Lift Kit delivers everything that you need to tackle some serious trails. Drivability and performance are the most important factors that are engineered and built into every TeraFlex lift kit. Properly developed suspension geometry, roll center, and load tuning ensure that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle. TeraFlex kits drive straight and will crawl anything, getting you there and back!
This kit includes 3” lift coil springs, front adjustable track bar, front sway bar disconnects, rear sway bar links, rear track bar bracket, bump stops and all necessary hardware.
This kit will allow you to run up to a 35” tire. Aftermarket wheels with 4.5” backspacing or less are required, or use stock wheels with TeraFlex Offset Wheel Adapters (#1055000 - 2 sets).
Fits all JK Wrangler models including Rubicon and Unlimited.
Note:
This kit must be used with adjustable control arms to establish correct caster and pinion angle during re-alignment.
2012+ JKs require exhaust spacers (#2610000) or other exhaust modification for proper driveline clearance.
This kit does not include shocks; longer shocks will be required.
Driveline modifications may be necessary with this suspension system, or the TeraFlex Rzeppa High Angle CV kit (#1744014) is a perfect solution.
| Searchable Sku | 1151220 |
|---|---|
| Manufacturer | TeraFlex |
