TeraFlex 4" Enduro LCG Long Flexarm Suspension System - No Shocks For 1997-06 Jeep Wrangler TJ 1449472
- Manufacturer: TeraFlex
- Part: Lift Kits - Suspension 3.5-4.5 Inch
The Enduro LCG Suspension System uses the same lower control arms and brackets as the Pro LCG Suspension System but retains the factory upper control arm mounting points. The Enduro LCG Long Flexarm Suspension System will transform your current TJ Wrangler’s handling capability both on and off-road. The long flexarm brackets allow for easy installation without hindering access to the transfer case.
The TeraFlex TJ Enduro LCG Long Flexarm Suspension System is designed for the off-road enthusiast who wants to maximize suspension performance with moderate modifications to the vehicle frame. This system is designed as a complete kit and includes all necessary components.
The Enduro LCG Suspension System uses the same lower control arms and brackets as the Pro LCG Suspension System but retains the factory upper control arm mounting points. The Enduro LCG Long Flexarm Suspension System will transform your current TJ Wrangler’s handling capability both on and off-road. The long flexarm brackets allow for easy installation without hindering access to the transfer case.
FEATURES
Low Center Of Gravity With Maximum Ground Clearance
Highway Handling & Maneuverability Increased
Allows Suspension Travel For Off Road Articulation
Designed To Fit 33" + Tires
HD 1.75" DOM FlexArm Tubing For Superior Strength
HD Monster Rod Ends For Strength, Adjustability, And Customization
Designed For TJ Wranglers Including The Rubicon
Includes:
1 Front Adjustable Trackbar
1 Long Arm Kit, QDs, & SBSPT
1 Rear Lower Shock Relocator
1 Rear Upper Monster FlexArms
1 - 4" Lift Kit
1 BellyUp Skid Plate
Full Wheel Alignment Needed
CV Style Drive Shaft And Extreme Short Shaft SVE Kit Recommended
For Rubicon Models Add Compressor Mount Plate Part# 4847400
Some Welding Recommended
With Using Stock Wheels And Tires Over 32" In Diameter Wheel Spacers Are Needed To Allow Unobstructed Turning, Especially With Rubicon Jeep Wheels
For Rubicon Models Add 1" Body Lift Old Part# 1942100, or Use Part# 1900100, To Lower The BellyUp Plate To Allow Room For The Transfer Case
Notes:
• REQUIRES aftermarket wheels w/ 4.5” backspacing or less – or Offset Wheel Adapters (# 1005200) for stock wheels – NOT INCLUDED.
• 4”+ lifts require CV-style driveshaft and Extreme Short Shaft Slip Yoke Eliminator Kit (# 4444400) or Short Shaft Slip Yoke Eliminator Kit (# 4444401). Highly recommended for 3” lift. NOT compatible w/ TJ Wrangler/Unlimited Rubicon models
• REQUIRES cutting/removal of factory control arm bracketry to install LCG Long Arm Brackets.
• REQUIRES cutting and welding.
• Alignment REQUIRED.
• 2003-2006 TJ Wrangler/Unlimited Rubicon models REQUIRE BellyUp Compressor Mount Bracket Kit (# 4847400).
• Adjustable Front Upper Short Control Arm Kit (# 1613800) available separately.
• Pro LCG High Steer System (# 1849000) available separately. Recommended for 4”+ lifts.
• REQUIRES longer shocks (NOT INCLUDED in base kit) – Falcon Series 3.0 Piggyback Shock Kit (# 04-01-30-400-304) or TeraFlex 9550 VSS Twin-Tube Shock Kit (# 1545270) recommended.
| Searchable Sku | 1449472 |
|---|---|
| Manufacturer | TeraFlex |
