MetalCloak HD Chromoly Dog-Legged Tie Rod for 18-26+ Jeep Wrangler JL, JLU & 20+ Gladiator JT Sport 7628-
SKU
MTK-7628-
We Price Match
- Part: Steering - Upgrades
- Manufacturer: MetalCloak
Chromoly Dog-Legged Tie Rod for the Rubicon JL Wrangler/JT Gladiator is strength with style for your vulnerable steering system.
As low as $512.95
Metalcloack 7628-
Chromoly Dog-Legged Tie Rod for the Rubicon JL Wrangler/JT Gladiator is strength with style for your vulnerable steering system.
Exclusive to MetalCloak this tie rod comes with dual 1-ton forged and heat treated 1" Dog-Leg Rod-Ends that have strength AND provides clearance for use with stock or aftermarket wheels - allows the best turning radius possible. MetalCloak dog-legged rod ends control tie rod flop providing better performance. Ends are sealed with grease boots to keep debris out and lubrication in. The adjustable tie rod can be adjusted while installed on the vehicle for fine tuning.
The heavy duty 3/16" steel adjustable steering stabilizer mount bracket installs onto the tie-rod and re-positions the the stabilizer up and out of harms way; the mount is designed for aftermarket steering stabilizers.
The optional billet mount is a two piece aluminum design, is simple to install, and allows you to position the stabilizer for maximum performance. Finished in anodized black with a laser engraved "M" around the recessed bolt holes for a clean and custom look.
Chromoly Dog-Legged Tie Rod for the Rubicon JL Wrangler/JT Gladiator is strength with style for your vulnerable steering system.
Exclusive to MetalCloak this tie rod comes with dual 1-ton forged and heat treated 1" Dog-Leg Rod-Ends that have strength AND provides clearance for use with stock or aftermarket wheels - allows the best turning radius possible. MetalCloak dog-legged rod ends control tie rod flop providing better performance. Ends are sealed with grease boots to keep debris out and lubrication in. The adjustable tie rod can be adjusted while installed on the vehicle for fine tuning.
The heavy duty 3/16" steel adjustable steering stabilizer mount bracket installs onto the tie-rod and re-positions the the stabilizer up and out of harms way; the mount is designed for aftermarket steering stabilizers.
The optional billet mount is a two piece aluminum design, is simple to install, and allows you to position the stabilizer for maximum performance. Finished in anodized black with a laser engraved "M" around the recessed bolt holes for a clean and custom look.
Fitment:
18+ Jeep Wrangler JL18+ Jeep Wrangler JL Unlimited
20+ Jeep Gladiator JT
Parts Included:
Tubular 1.625”OD .375” wall ID 4130 Chromoly CDSGold Zinc Chromate Finish
1-Ton Forged Heat Treated Off Set Dog Leg Rod Ends
Rod End Design Controls Tie Rod Flop
OE Taper Pin and lock nut for Exact Fitment
Sealed with Durable Rubber Grease Boots
Adjustable While Installed
Includes HD Steering Stabilizer Bracket
WORKS WITH JL/JT STOCK WHEEL BACKSPACING!
Important Note: THIS IS ONLY FOR THE NON-RUBICON EDITION!
Notes:
Note: Minimum 2" lift required.
Note: The RockSport steering stabilizer kit works with Left Hand Drive applications only.
Note: Raised steering stabilizer requires at least 2” of bump stop to clear frame.
Note: If purchasing the billet tie rod mount MetalCloak highly recommends using anti-seize on all bolts.
| Searchable Sku | 7628 7628-B |
|---|---|
| Bulk Item Surcharge | $0.00 |
| Manufacturer | MetalCloak |
Write Your Own Review
