MetalCloak HD Steering System RockSport RED Edition for 18-26+ Jeep Wrangler JL, JLU & Gladiator JT 7668-
SKU
MTK-7668-
We Price Match
- Part: Steering - Upgrades
- Manufacturer: MetalCloak
The Heavy Duty RockSport RED Steering System for the JL Wrangler & JT Gladiator is stylish strength for your Jeep's vulnerable and all important steering system.
As low as $1,035.95
Metalcloack 7668-
The Heavy Duty RockSport RED Steering System for the JL Wrangler & JT Gladiator is stylish strength for your Jeep's vulnerable and all important steering system.
Exclusive to MetalCloak this Tie Rod comes with Dual 1-Ton forged and heat treated 1" Dog-Leg Rod-Ends that have strength and provides clearance for use with stock or aftermarket wheels - allowing the best turning radius possible. MetalCloak dog-legged rod ends control tie rod flop providing better performance. Ends are sealed with grease boots to keep debris out and lubrication in. The dog-legged tie rod can be adjusted while installed on the vehicle for fine tuning.
The high clearance bends of the strong 1.375 OD Drag Link tubing is engineered for up and down travel providing the needed space for aftermarket axles and differential covers and is coated with gold zinc chromate for a long lasting finish. Factory like fitment with OE taper pin and lock nut are found with the Dual 1-ton forged and heat treated Rod-Ends, they have extra strength right where it is needed and are designed to control directional misalignment to prevent Drag Link flop. Sealed with Durable rubber grease boots, the ends are simple to service via zerk fittings.
The assembly is easily adjusted while mounted on the vehicle for fine tuning of axle placement.
The heavy duty 3/16" axle side steering stabilizer mount bracket installs into factory locations and re-positions the stabilizer up and out of harm’s way. The RockSport steering stabilizer/damper has increased compression and extension damping performance over the original equipment and is tuned specifically for the JL Wrangler & JT Gladiator.
Choose either the standard steel stabilizer mount or the billet mount; either choice is simple to install, and allows you to position the stabilizer for maximum performance. The standard mount is 3/16" steel and gold zinc plated while the Aluminum billet clamp is Finished in anodized black with a laser engraved "M" around the recessed bolt holes for a clean and custom look.
The improved performance of this system will assist in the overall improvement of ride and control of your Jeep.
The Heavy Duty RockSport RED Steering System for the JL Wrangler & JT Gladiator is stylish strength for your Jeep's vulnerable and all important steering system.
Exclusive to MetalCloak this Tie Rod comes with Dual 1-Ton forged and heat treated 1" Dog-Leg Rod-Ends that have strength and provides clearance for use with stock or aftermarket wheels - allowing the best turning radius possible. MetalCloak dog-legged rod ends control tie rod flop providing better performance. Ends are sealed with grease boots to keep debris out and lubrication in. The dog-legged tie rod can be adjusted while installed on the vehicle for fine tuning.
The high clearance bends of the strong 1.375 OD Drag Link tubing is engineered for up and down travel providing the needed space for aftermarket axles and differential covers and is coated with gold zinc chromate for a long lasting finish. Factory like fitment with OE taper pin and lock nut are found with the Dual 1-ton forged and heat treated Rod-Ends, they have extra strength right where it is needed and are designed to control directional misalignment to prevent Drag Link flop. Sealed with Durable rubber grease boots, the ends are simple to service via zerk fittings.
The assembly is easily adjusted while mounted on the vehicle for fine tuning of axle placement.
The heavy duty 3/16" axle side steering stabilizer mount bracket installs into factory locations and re-positions the stabilizer up and out of harm’s way. The RockSport steering stabilizer/damper has increased compression and extension damping performance over the original equipment and is tuned specifically for the JL Wrangler & JT Gladiator.
Choose either the standard steel stabilizer mount or the billet mount; either choice is simple to install, and allows you to position the stabilizer for maximum performance. The standard mount is 3/16" steel and gold zinc plated while the Aluminum billet clamp is Finished in anodized black with a laser engraved "M" around the recessed bolt holes for a clean and custom look.
The improved performance of this system will assist in the overall improvement of ride and control of your Jeep.
Fitment:
18+ Jeep Wrangler JL18+ Jeep Wrangler JL Unlimited
20+ Jeep Gladiator JT
Features:
Tubular 1.625” OD .375” Wall Chromoly Tie RodDrag Link
Gold Zinc Chromate Finish
1-Ton Forged Heat Treated Dog Leg Rod Ends
Rod End Design Controls Tie Rod Flop
OE Taper Pin and Lock Nut for Exact Fitment
Sealed with Durable Rubber Grease Boots
Adjustable While Installed
Specifically tuned RockSport stabilizer/dampener
WORKS WITH JL/JT STOCK WHEEL BACKSPACING!
Parts Included:
Tie RodDog Legged Tie Rod Ends
Drag Link
Drag Link Anti Flop Rod Ends
Standard Tie Rod Mount or Billet Tie Rod Mount
Steering Stabilizer Mount
RockSport Steering Stabilizer
All Required Hardware
Important Note: THIS IS FOR THE NON-RUBICON EDITION ONLY!
Notes:
Note: The RockSport steering stabilizer kit works with Left Hand Drive applications only.
Note: Raised steering stabilizer requires at least 2" of bump stop to clear frame
Note: If purchasing the billet tie rod mount MetalCloak highly recommends using anti-seize on all bolts.
| Searchable Sku | 7668 7668-B |
|---|---|
| Bulk Item Surcharge | $20.95 |
| Manufacturer | MetalCloak |
Write Your Own Review
