Air Compressors

VIAIR's 90 Series compressors offer a light duty solution for smaller air requirements and are meant to fill no larger than a 1.0 gallon air tank. Multiple duty cycle, mounting, compressor finish and intake options are available depending on model. Included Parts: - Omega Bracket - Check Valve - Vibration Isolators - Mounting Hardware - Installation Instructions Specifications - 12-Volt - Permanent Magnetic Motor - Duty Cycle: 9% @ 100 PSI - Max. Working Pressure: 120 PSI - Max. Air Tank... Read More Learn More

VIAIR’s Constant Duty Onboard Air System is a pre-packaged compressed air solution that provides a 100% duty cycle 450C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs. Included Parts: - 2.5 Gallon VIAIR Air Tank -... Read More Learn More

400P is a larger portable compressor kit that can inflate up to a 35-inch tire from 0 to 30 PSI in less than 5 minutes. Used and approved of by off road enthusiasts worldwide, the 400P can save you when you’re miles from home. Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. - Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose... Read More Learn More

450C is a continuous duty cycle compressor. Features include a standard 1/4” NPT stainless steel braided leader hose with inline check valve and insulated wiring for simple installation. Learn More

450P-Automatic offers an automatic shut-off function in a larger portable compressor. This 100% duty cycle unit is capable of pressures up to 150 PSI and can be operated for up to 40 minutes at a time before needing to be rested. The 450P-Automatic comes with a close-ended gas station-style air gun for added convenience. Portable compressors with automatic shutoff come into play when moving from tire to tire, and when checking tire pressure in the middle of a tire fill. A typical portable... Read More Learn More

Sealed for moisture resistance and comes with 1/8"" NPT male port fitting 1/8" Male NPT Port 12 GA Lead Wires 110 psi On, 145 psi Off Learn More

VIAIR tanks are internally coated for corrosion resistance. All VIAIR tanks are SAE J-10 self-compliant. Features: - 150 PSI Rated - (6) 1/4" NPT Ports - Air Tank Temperature Rating: -40°C ~ +80°C - Air Tank Temperature Rating: -40°F ~ +176°F - Dimensions: 19"L x 6"W x 7.5"H - Net Weight: 11.95 lbs. Learn More

Features a normally-closed air chuck that can be opened by pressing the lever on the inflation gun. Because this air chuck is normally closed, the Tire Inflation Gun is a perfect compliment to onboard air systems and VIAIR’s line of “Portable Automatic” compressors. Learn More

85P is a small portable compressor with a built-in LED work light, capable of inflating up to 31-inch tires by simply plugging into your cigarette lighter power port (15 amps max.). Connect the screw-on tire chuck to a tire valve stem before turning the unit on. Tire pressure can be monitored using the gauge incorporated into the top of the unit. Please Note: Always check your vehicle's power port rating for maximum amperage before ordering. The 85P does not work with Presta bicycle... Read More Learn More

Quarter Duty Cycle Onboard Air System is a smaller, 120 psi onboard air system, suitable for many pneumatic needs, including smaller inflation tasks (not including the inflation of automotive tires), air horns and more. The 25% Duty Cycle Onboard Air System will provide enough service time to operate for about 10 minutes of continued use, providing you give the system 30 minutes to cool down afterwards. Please Note: Use thread sealant for proper installation. Teflon tape is not recommended.... Read More Learn More