This kit is for use with the VIAIR 2-1/2 gal. Air Tank if you are not using air lockers. Kit contains two 1/4" plugs, one drain petcock, one 1/4" compression fitting, and one 175 PSI rated safety valve.
For use with the VIAIR 2-1/2 gallon tank, when not using air lockers
Kit contains two 1/4" plugs, one drain petcock, one 1/4" compression fitting and one 175 PSI rated safety valve Learn More
VIAIR tanks are internally coated for corrosion resistance. All VIAIR tanks are SAE J-10 self-compliant.
Max Pressure: 150 PSI
Four 1/4" NPT Ports
Dimensions: 10.25" L x 6" W x 7.5" H
Rust Resistant Coating
Mounting Hardware Included Learn More
All Viair tanks are SAE J10 certified and rated to either 150 or 200 PSI maximum working pressure and equipped with either 1/4' or 3/8" NPT ports in various configurations. All air tanks are coated to resist rusting and oxidation.
Max Pressure: 200 PSI
Six 1/4" NPT Ports
Dimensions: 23.5" L x 6" W x 7.5" H
Rust Resistant Coating
Mounting Hardware Included Learn More
Having the right tools is a necessity when you own a Jeep vehicle, especially if you enjoy hitting the trails. One tool that should be at the top of your list is this 30 Amp Portable Air Compressor from RES-Q. Learn More
VIAIR’s Medium Duty Onboard Air System is a pre-packaged compressed air solution that provides a 33% duty cycle 325C compressor, 2.5 gallon air tank, and all components needed to install basic vehicle-based pneumatics.
Please Note: Use thread sealant for proper installation.
Teflon tape is not recommended.
Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
Included Parts:
- 2.5 Gallon VIAIR Air Tank
- 325C VIAIR... Read MoreLearn More
VIAIR’s Heavy Duty Onboard Air System is a pre-packaged compressed air solution that provides a faster 33% duty cycle 400C compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires right out of the box.
Please Note: Use thread sealant for proper installation.
Teflon tape is not recommended.
Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.
Included Parts:
- 2.5... Read MoreLearn More
VIAIR’s Super Duty Onboard Air System is a pre-packaged compressed air solution that provides two fast 325C, 33% duty cycle compressors, a 2.0 gallon air tank, inline pressure regulation, and all components needed to install a working system capable of inflating tires, managing air locking differentials, and more.
Please Note: Use thread sealant for proper installation.
Teflon tape is not recommended.
Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for... Read MoreLearn More
Fast-Fill 200 PSI Air Source Kits come with a powerful, low amp-draw 380C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry’s leading 200 PSI compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8" (I.D.) air line pre-installed! To use, simply connect the pressure switch to fused power, make a solid... Read MoreLearn More