Frame - Restoration Parts

The Rust Buster Rear Frame Crossmember helps to replace the frame location in the rear of your TJ Wrangler. The EZ Slip design allows the repair section to slide onto the frame and will include all the factory needed holes and mounting locations. We use the latest in CAD design to model each repair section before it is laser cut, formed and finish welded. Our repair sections will help to keep your Jeep on the road for years to come. Learn More

Rear Frame Crossmember, Located in Front of Rear Bumper. Learn More

Our SafeTCap ART-146 is a complete replacement for the original track bar and upper trailing arm bracket mounted on the rear axle. This mount was developed to fit a 2.75 diameter axle, but will work on larger diameter axles. The bracket straddles the sway bar bracket which remains in place during installation. The ART-146 is welded directly to the axle once the old bracket is removed and the surface to be welded is prepared. Our ART-146 bracket is made from 7 gage steel, and is CNC cut, bent,... Read More Learn More

Our ART-143 rear lower coil spring mount for the 1997-2006 Jeep Wrangler TJ/LJ was designed as a direct replacement for your original coil spring mount on the rear axle. This part is to be welded on the rear axle once the original spring mount is removed and the axle is ground down to clean metal. Our ART-143 is made from 7 gage steel and is CNC cut, bent and assembled by our AWS certified welders in the USA. This part is sold individually and is designed to fit both Driver and Passenger... Read More Learn More

Our SafeTCap ART-136 is a replacement for the OEM rear track bar bracket on the Jeep Wrangler TJ. The bracket is made from 7 gauge HRPO steel, CNC cut, bent and MIG welded in the USA facility. The hardware to remount the track bar is included with the bracket. To install this part you will need to disconnect the track bar and you simply cut off the old mount and weld the new mount in the footprint of the old mount. ATTENTION: The SafeTCap ART-136 is designed as an OEM replacement and is not... Read More Learn More

This part is for Right (passenger) side and Fits 1997-2006 Jeep Wrangler TJ. Our kit repairs the rear frame area that ties into the rear crossmember. It is designed to fit over your existing frame after you cut and remove the rotted portions. The part measures 24” long, is made from 11 gauge cold rolled steel, CNC cut and welded by our Certified welders. Learn More

Learn More

Learn More

The Rust Buster Front Upper Control Arm Mount helps to replace the frame mount on your TJ Wrangler. The EZ fit design allows the repair section to slide onto the frame and will include all the factory needed holes and mounting locations. We use the latest in CAD design to model each repair section before it is laser cut, formed and finish welded. Our repair sections will help to keep your Jeep on the road for years to come. Learn More

The Rust Buster Center Frame at Skid Plate Mount helps to replace the center frame location on your TJ Wrangler. The EZ Slip design allows the repair section to slide onto the frame and will include all the factory needed holes and mounting locations. We use the latest in CAD design to model each repair section before it is laser cut, formed and finish welded. Our repair sections will help to keep your Jeep on the road for years to come. Learn More