Suspension - Control Arms

TeraFlex JK: Alpine Short Control Arms provide complete alignment adjustability and dependability for maximum performance on JK Wrangler/Unlimited models with 2-4" lifts. Learn More

Rear Upper Long FlexArm Single For 2004-06 Jeep Wrangler TJ Unlimited Models Allows custom pinion and caster angles Sold individually The TeraFlex TJ rear upper FlexArm can be added to any existing TeraFlex Pro LCG suspension lift. FlexArms allow custom pinion and caster angles to be set for proper alignment, they also are used to re-center the axle in the wheel well for proper suspension movement, and to adjust wheelbase length. This kit includes one adjustable TJ rear upper FlexArm. Learn More

Are you tired of your control arms always coming out of adjustment? Stop the constant axle misalignment. These FlexArm cam-bolt washers are designed to fit into the OEM spot for the cam-bolt adjusters. These washers prevent the FlexArm bolt from potential movement by locking the position of the bolt. Designed for Front Lower and Rear Upper Arm mounts. Includes: Cam Bolt Washers - Eight Learn More

FlexArm, Long Upper, Front (PRO LCG), Monster Style Min Length = 22-1/2" Max Length = 24 7/8" Uses 7/16" [12mm] Bolt 7/8-18 UNS Thread 1 1/8" Wrench On Tube 1 1/4" Wrench On Jam Nut Details: Front Upper Adjustable Monster Flex Control Arms Greasable Monster Flex Joints Finish: Black Powder Coated Sold As: Pair Learn More

TeraFlex Flex Ends will allow some misalignment when articulating, and have a specially designed urethane bushing to restrict excess movement and allow control and handling at highway speeds. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

Used as replacement in Teraflex 1615700 Monster Lower FlexArms for 84-06 Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ & WJ, Wrangler TJ & Unlimited Details: Right hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

When a quiet street ride and vibration free driving are required, the rubber bushing ends will give you the feel you want. The rubber bushing will provide the most noise and vibration dampening characteristics possible. This end can also be used as a replacement for any control arm utilizing a 1-1/4” x 12 tpi. ‘heim’ type rod end. Uses a 9/16” bolt. LEFT Hand Thread. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

The angled rod end forging is designed for applications needing additional clearance for tires, or other frame configurations. The end utilizes a 7/8” x 18 tpi. shank and accepts a 9/16” bolt. The TJ Wrangler version features a 2" wide shoulder width while the JK version comes with a standard 2-5/16" shoulder width. Details: Right hand thread 9 degree angle 2-5/16" shoulder width 7/8" x 18 TPI shank Accepts 9/16" bolt Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

These TeraFlex JL / JT: Front Control Arm Sport Frame Brackets are a must to correct caster angles and restore factory geometry on JL Wrangler/Unlimited models with 2.5-4.5" lift kits and JT Gladiator models with 3.5-4.5" lift kits. Additionally these Sport Frame Brackets reduce brake dive and improve overall ride quality resulting in a smoother ride. Install these bolt-on brackets between the factory frame mounts and the stock front upper and front lower control arms. Can also be used... Read More Learn More