Rugged Ridge Heavy Duty Tie Rod Kit For 1987-95 Jeep Wrangler YJ 18050.83
SKU
RR-18050.83
We Price Match
- Manufacturer: Rugged Ridge
- Part: Steering - Upgrades
These Tie Rod Assemblies provide virtually 1-ton strength with factory tapered ends, so no modification is required! The tube is 1.25” OD SAE steel with .25” wall thickness that is cold rolled, pierced and drawn through dies.
Recommended for Jeeps with 2"-4" Lift
Recommended 2" drop pitman arm.
Recommended for Jeeps with 2"-4" Lift
Recommended 2" drop pitman arm.
Special Price $523.95 Regular Price $616.41
Rugged Ridge 18050.83
1987-95 YJ Wrangler
These Tie Rod Assemblies provide virtually 1-ton strength with factory tapered ends, so no modification is required! The tube is 1.25” OD SAE steel with .25” wall thickness that is cold rolled, pierced and drawn through dies. This bolt-on tie rod and drag link solution is perfect for preventing bent tie rods from off roading with larger tires. All rod ends come complete with dust shields, castle nuts, cotter pins, 2 jamb nuts and zerk fittings.
Three (3) Year Limited Warranty.
Notes:
With any lift over 2” a drop pitman is recommended:
This kit has been designed to help keep steering links as close to level as possible, but a drop pitman
arm may be required to assist in keeping links closer to parallel on lifted vehicles. Because of how the
drag link attaches to the passenger side tie-rod slight rotation of the steering linkage (twisting up and
down) may be visible when steering wheel is cycled. This will be exaggerated on vehicles with taller
lifts as the drag link will want to push down or up, as well as side to side, during its range of
movement.
1987-95 YJ Wrangler
These Tie Rod Assemblies provide virtually 1-ton strength with factory tapered ends, so no modification is required! The tube is 1.25” OD SAE steel with .25” wall thickness that is cold rolled, pierced and drawn through dies. This bolt-on tie rod and drag link solution is perfect for preventing bent tie rods from off roading with larger tires. All rod ends come complete with dust shields, castle nuts, cotter pins, 2 jamb nuts and zerk fittings.
Three (3) Year Limited Warranty.
Notes:
With any lift over 2” a drop pitman is recommended:
This kit has been designed to help keep steering links as close to level as possible, but a drop pitman
arm may be required to assist in keeping links closer to parallel on lifted vehicles. Because of how the
drag link attaches to the passenger side tie-rod slight rotation of the steering linkage (twisting up and
down) may be visible when steering wheel is cycled. This will be exaggerated on vehicles with taller
lifts as the drag link will want to push down or up, as well as side to side, during its range of
movement.
| Searchable Sku | 18050.83 |
|---|---|
| Manufacturer | Rugged Ridge |
