Synergy MFG Front Steering Correction Kit For 2007-18 Jeep Wrangler JK 2 Door & Unlimited 4 Door Models 8011
SKU
SYN-8011
We Price Match
- Manufacturer: Synergy MFG
- Part: Steering - Upgrades
Designed to correct the wandering steering feeling that is sometimes experienced when lifting a Jeep JK. The drag link is made from crush resistant 1-3/4".188 Wall 1026 DOM material. Exclusive double adjuster sleeve and pinch bolt setup for adjustment while the drag link is installed. The track bar bracket raises the vehicles suspension roll center by 3.0".
Special Price $568.42 Regular Price $710.53
Synergy MFG 8011
Synergy MFG Front Steering Correction Kit For 2007-18 Jeep Wrangler JK 2 Door & Unlimited 4 Door Models
Technical Details:
100% bolt on
raises the vehicles suspension roll center by 3.0"
Powder coat finish for maximum durability and corrosion resistance
Includes SYN8001 - Synergy JK High Steer Drag Link Kit and SYN8055 - Synergy JK Front Track Bar Bracket
Made in the USA
Designed to correct the wandering steering feeling that is sometimes experienced when lifting a Jeep JK. The drag link is made from crush resistant 1-3/4".188 Wall 1026 DOM material
Exclusive double adjuster sleeve and pinch bolt setup for adjustment while the drag link is installed. The track bar bracket raises the vehicles suspension roll center by 3.0". Special bolt-on design strengthens the factory axle mount that is prone to failure. Raising the roll center reduces vehicle body roll and dramatically improves overall handling. The bracket relocates the factory or aftermarket steering stabilizer up and out of harms way. Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
Use of the front track bar bracket requires the use of a minimum 3.0" bump stop spacer
Note: Installation of Drag Link Flip Kit (SYN8001) requires the passenger knuckle to be reamed using a 1-1/2" Tapered Reamer (Part SYN4011).
An alternative to this is to use the Jeep JK Tie Rod Flip Adapter (SYN8001-03-01)
Synergy MFG Front Steering Correction Kit For 2007-18 Jeep Wrangler JK 2 Door & Unlimited 4 Door Models
Technical Details:
100% bolt on
raises the vehicles suspension roll center by 3.0"
Powder coat finish for maximum durability and corrosion resistance
Includes SYN8001 - Synergy JK High Steer Drag Link Kit and SYN8055 - Synergy JK Front Track Bar Bracket
Made in the USA
Designed to correct the wandering steering feeling that is sometimes experienced when lifting a Jeep JK. The drag link is made from crush resistant 1-3/4".188 Wall 1026 DOM material
Exclusive double adjuster sleeve and pinch bolt setup for adjustment while the drag link is installed. The track bar bracket raises the vehicles suspension roll center by 3.0". Special bolt-on design strengthens the factory axle mount that is prone to failure. Raising the roll center reduces vehicle body roll and dramatically improves overall handling. The bracket relocates the factory or aftermarket steering stabilizer up and out of harms way. Laser cut from 3/16" steel & 2 stage powdercoat finish for maximum strength and durability
Use of the front track bar bracket requires the use of a minimum 3.0" bump stop spacer
Note: Installation of Drag Link Flip Kit (SYN8001) requires the passenger knuckle to be reamed using a 1-1/2" Tapered Reamer (Part SYN4011).
An alternative to this is to use the Jeep JK Tie Rod Flip Adapter (SYN8001-03-01)
Searchable Sku | 8011 |
---|---|
Manufacturer | Synergy MFG |