TeraFlex High Steer Knuckle For 1987-06 Jeep Wrangler YJ, TJ & Unlimited 4828490
SKU
TER-4828490
We Price Match
- Manufacturer: TeraFlex
- Part: Steering - Upgrades
The TeraFlex Dana 30 High Steer Knuckle replaces the outer knuckle on the passenger"™s side with a new high steer knuckle. The knuckle features tapered inserts that make customizing easy by allowing the drag link (knuckle end) to enter from the top or the bottom of the steering arm. The tapered sleeves are available for the drag link to fit stock taper rod ends, or the large taper rod ends (standard Dana 60).
The new one-piece knuckle raises the steering arm position to correct the steering linkage geometry on vehicles with five or more inches of lift. This knuckle will work with many leaf spring suspensions (YJ) or custom link suspensions (like the Tera LCG system) and fits all TJs, YJs, XJs, and ZJs 1990 and up. Custom tie rod and drag link (available separately from TeraFlex) are required.
For use on Wranglers/Cherokees older than 1991 you will need to replace your front calipers, rotors and uni-bearings with the those found on the 1992-2006 Wranglers/Cherokee XJs.
Note: The stock OEM ends will not work in place of TeraFlex"™s stock-taper 1-ton end.
Details:
Dana 30
Passenger side
Custom drag link and tie rods available separately
The new one-piece knuckle raises the steering arm position to correct the steering linkage geometry on vehicles with five or more inches of lift. This knuckle will work with many leaf spring suspensions (YJ) or custom link suspensions (like the Tera LCG system) and fits all TJs, YJs, XJs, and ZJs 1990 and up. Custom tie rod and drag link (available separately from TeraFlex) are required.
For use on Wranglers/Cherokees older than 1991 you will need to replace your front calipers, rotors and uni-bearings with the those found on the 1992-2006 Wranglers/Cherokee XJs.
Note: The stock OEM ends will not work in place of TeraFlex"™s stock-taper 1-ton end.
Details:
Dana 30
Passenger side
Custom drag link and tie rods available separately
Special Price $503.16 Regular Price $628.95
TeraFlex 4828490
The TeraFlex Dana 30 High Steer Knuckle replaces the outer knuckle on the passenger"™s side with a new high steer knuckle. The knuckle features tapered inserts that make customizing easy by allowing the drag link (knuckle end) to enter from the top or the bottom of the steering arm. The tapered sleeves are available for the drag link to fit stock taper rod ends, or the large taper rod ends (standard Dana 60).
The new one-piece knuckle raises the steering arm position to correct the steering linkage geometry on vehicles with five or more inches of lift. This knuckle will work with many leaf spring suspensions (YJ) or custom link suspensions (like the Tera LCG system) and fits all TJs, YJs, XJs, and ZJs 1990 and up. Custom tie rod and drag link (available separately from TeraFlex) are required.
For use on Wranglers/Cherokees older than 1991 you will need to replace your front calipers, rotors and uni-bearings with the those found on the 1992-2006 Wranglers/Cherokee XJs.
Note: The stock OEM ends will not work in place of TeraFlex"™s stock-taper 1-ton end.
Details:
Dana 30
Passenger side
Custom drag link and tie rods available separately
The TeraFlex Dana 30 High Steer Knuckle replaces the outer knuckle on the passenger"™s side with a new high steer knuckle. The knuckle features tapered inserts that make customizing easy by allowing the drag link (knuckle end) to enter from the top or the bottom of the steering arm. The tapered sleeves are available for the drag link to fit stock taper rod ends, or the large taper rod ends (standard Dana 60).
The new one-piece knuckle raises the steering arm position to correct the steering linkage geometry on vehicles with five or more inches of lift. This knuckle will work with many leaf spring suspensions (YJ) or custom link suspensions (like the Tera LCG system) and fits all TJs, YJs, XJs, and ZJs 1990 and up. Custom tie rod and drag link (available separately from TeraFlex) are required.
For use on Wranglers/Cherokees older than 1991 you will need to replace your front calipers, rotors and uni-bearings with the those found on the 1992-2006 Wranglers/Cherokee XJs.
Note: The stock OEM ends will not work in place of TeraFlex"™s stock-taper 1-ton end.
Details:
Dana 30
Passenger side
Custom drag link and tie rods available separately
| Searchable Sku | 4828490 |
|---|---|
| Manufacturer | TeraFlex |
