Synergy Front Sway Bar Links Adjustable With Quick Disconnects (0-2" Lift) for 18-23+ Jeep Wrangler JL, JLU & Gladiator JT 8859-10
- Part: Suspension - Sway Bar Disconnects Suspension - Sway Bars, Parts & Accessories
- Manufacturer: Synergy MFG
Min collapsed length: 9.0 Inches - Max extended length: 10.0 Inches
See Notes for 2024+ Models and 2-4" Lifts
Cutting of Passenger Tabs Needed for Quick Disconnections. No cutting required if using as a replacement sway bar link.
Synergy Jeep JL / JT Front Sway Bar Links With Quick Disconnects are designed for those who will be taking their Jeep off road and need an easy way to disconnect the front sway bar to allow for more flex. These can be used on all Jeep models, including Rubicon models with the electronic sway bar disconnect, and are designed for vehicles with 0-4 inches of lift. While Rubicon models do have an electronic sway bar disconnect, manual disconnects may still be required on vehicles with a lot of suspension down travel to prevent the sway bar links from over-centering. And, in the rare occurrence the factory electronic sway bar disconnect system fails, the system can still be manually disconnected. Easily removable linchpins disconnect the sway bar links from the axle to allow them to be rotated up and out of the way and secured with the included frame mount brackets. Greasable spherical bushings allow resistance-free articulation of the sway bar links, making disconnecting and connecting a breeze.
Fitment:
18-25+ Jeep Wrangler JL18-25+ Jeep Wrangler JL Unlimited
20-25+ Jeep Gladiator JT
For 2024+ models you must use Synergy End Link Adapters 8883-01
Features:
Sway Bar Links are longer than stock and adjustable to fit 0-4 inches of liftQuick disconnects allow the sway bar links to be quickly disconnected for additional flex and performance off-road
Sway Bar Links are CNC formed from high quality 1020 CR Solid Steel
Quick disconnect studs and linchpins included
Frame side brackets for securing disconnected sway bar links included
Sealed tie rod ends provide a direct linkage to the sway bar
Greaseable spherical bushings allow trouble-free connecting and disconnecting of sway bar links
No drilling or cutting required (Except for stock height vehicles, See Notes)
Components feature clear zinc plate for maximum corrosion resistance
Sway bar links also feature an abrasion-resistant E-coat finish for maximum durability and corrosion resistance
Parts Included:
(8859-11) - Synergy Jeep JL / JLU / JT Front Extended Sway Bar Links(8859-12) - Synergy Jeep JL / JLU / JT Sway Bar Link Disconnect Brackets
Notes:
For 2024+ models you must use Synergy End Link Adapters 8883-01
For lifts 2 inches and taller, these sway bar links require relocation with Synergy MFG 8855-02 Sway Bar
Relocation Brackets, or 8855-11 Front Track Bar Relocation Bracket and the vehicle must be running a minimum of 2 inches of front bump stop spacing.
For stock height vehicles, the sway bar links must be installed in the stock location on the axle and the passenger side sway bar tab needs to be removed. No front bump stop spacing is required.
Not compatible with JT Gladiator Mojave, the disconnect brackets do not clear the shock reservoir hose and retainer clips.
We always recommend manually disconnecting your sway bar links in any offroad application on both Rubicon and non-Rubicon models
Factory sway bar disconnects do not allow for enough articulation to prevent damage to your track bar mount or electronic disconnect
| Searchable Sku | 8859-10 |
|---|---|
| Bulk Item Surcharge | $0.00 |
| Manufacturer | Synergy MFG |
