TeraFlex 3" Suspension Lift Kit With Trackbar & 9550 Shocks For 2007-18 Jeep Wrangler JK Unlimited 4 Door Models 1251220
SKU
TER-1251220
We Price Match
- Manufacturer: TeraFlex
- Part: Lift Kits - Suspension 2-3 Inch
Includes 3” lift coil springs, 9550 VSS shock absorbers, front adjustable track bar, front sway bar disconnects, rear sway bar links, rear track bar bracket, bump stops and all necessary hardware.
Special Price $1,594.36 Regular Price $1,992.95
Bulk Item Surcharge: $76.95
TeraFlex 1251220
The TeraFlex JK 3” Suspension Lift Kit delivers the ability to tackle some serious trails. Drivability and performance are the most important factors that are engineered and built into every TeraFlex lift kit. Properly developed suspension geometry, roll center, and load tuning ensure that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle. TeraFlex kits drive straight and will crawl anything, getting you there and back!
This system includes 3” lift coil springs, 9550 VSS shock absorbers, front adjustable track bar, front sway bar disconnects, rear sway bar links, rear track bar bracket, bump stops and all necessary hardware.
This kit allows up to a 35” tire; aftermarket wheels with 4.5” backspacing or less are required, or use stock wheels with TeraFlex Offset Wheel Adapters (#1055000 - 2 sets).
Fits all JK Wrangler models including Rubicon and Unlimited.
Note:
This kit must be used with adjustable control arms to establish correct caster and pinion angle during re-alignment.
2012+ JKs require exhaust spacers (#2610000) or other exhaust modification for proper driveline clearance.
Driveline modifications may be necessary with this suspension system, or the TeraFlex Rzeppa High Angle CV kit (#1744014) is a perfect solution.
The TeraFlex JK 3” Suspension Lift Kit delivers the ability to tackle some serious trails. Drivability and performance are the most important factors that are engineered and built into every TeraFlex lift kit. Properly developed suspension geometry, roll center, and load tuning ensure that all factory stability controls remain functional and within the parameters that Jeep originally engineered into the vehicle. TeraFlex kits drive straight and will crawl anything, getting you there and back!
This system includes 3” lift coil springs, 9550 VSS shock absorbers, front adjustable track bar, front sway bar disconnects, rear sway bar links, rear track bar bracket, bump stops and all necessary hardware.
This kit allows up to a 35” tire; aftermarket wheels with 4.5” backspacing or less are required, or use stock wheels with TeraFlex Offset Wheel Adapters (#1055000 - 2 sets).
Fits all JK Wrangler models including Rubicon and Unlimited.
Note:
This kit must be used with adjustable control arms to establish correct caster and pinion angle during re-alignment.
2012+ JKs require exhaust spacers (#2610000) or other exhaust modification for proper driveline clearance.
Driveline modifications may be necessary with this suspension system, or the TeraFlex Rzeppa High Angle CV kit (#1744014) is a perfect solution.
Searchable Sku | 1251220 |
---|---|
Manufacturer | TeraFlex |