TeraFlex High Steer System (4-6" Lift) For 1997-06 Jeep Wrangler XJ, MJ, ZJ, TJ & Unlimited 1813000

The TeraFlex high steer system was originally designed to be used with our top of the line suspension system- the MAX-LCG, which utlilizes a front 4-link triangulation (eliminating the trackbar). The High Steer Kit is essential in that application. We found that many Jeeps with more than 4" of lift while still utilizing a trackbar system would benefit from a high steer solution. This kit will beef up the essential steering components of your Dana 30 front axle. The system includes a HD tie rod and drag link with one ton tie rod ends & tapered inserts, and the HD cast high steer knuckle.

The high steer system is not an all inclusive kit. Additional modifications will be required that are not included in the TeraFlex high steer system. These modifications may include front swaybar links, front trackbar mounting, and offset wheels.

Also fits ZJ Grand Cherokee XJ Cherokee and MJ Comanche with Dana 30 front axles – requires additional modifications. The High Steer HD Aluminum Drag Link and Tie Rod can be used to convert the TJ–s stock steering to a cross steering or a flipped steering setup. Flipping" the High Steer HD Aluminum Drag Link over the Knuckle helps eliminate front-end shimmy bump steer and other alignment issues.

High Steer System 4" or More Lift Dana 30
Will also work on the Rubicon Dana 44

Kit Includes:
High Steer System (# 1813000)
High Steer Knuckle (# 4828490)
High Steer HD Aluminum Drag Link Kit (# 4920244)
High Steer HD Aluminum Tie Rod Kit (# 4920251)

Additional Needed if building steering: Does NOT include
Drop Pitman Arm (# 1922133)
High Steer Sway Bar Mount Kit (# 4959100)
Sway Bar Quick Disconnects (# 1743092)
Steering Stabilizer Mount (# 1510090)
Recommend our High Steer HD Adjustable Front Track Bar & Bracket Kit (# 4923200)
Most replacement components available separately.

Compatible with all factory and aftermarket axle shafts ball joints and wheel hubs.