TeraFlex

TeraFlex TJ/LJ | ZJ | XJ Adjustable Front Track Bar Kit to fine tune your front suspension and eliminate bump steer. The track bar bushing adds adjustability, improves durability, and reduces the effects of front wheel shimmy. Learn More

The TeraFlex TJ high steer trackbar kit is designed to be used in conjunction with our high steer kit. This kit will allow you to fine tune the drag link & trackbar angles to eliminate and correct bumpsteer or other front end issues. The kit includes an upper frame bracket, lower axle bracket, and adjustable trackbar. Both brackets feature multiple mounting holes to fine tune for lift height and trackbar position. This kit is designed to put the trackbar parallel with the drag link. This kit... Read More Learn More

Large Rod End Field Repair Tool This repair tool will make joint rebuilding in the field as simple as it gets. This in fact is the same tool that we use in house to rebuild joints. The repair tool is easy to use with two open end wrenches, or sockets. Learn More

Fits TJ Wranglers (‘97-newer) with minimum 3” lift. Requires use of a TeraFlex rear track bar bracket if using adjustable control arms for SYE, or up to 6" lift. 1944000 Learn More

Replacement TeraFlex TJ: Track Bar Joint. Right-hand thread. The specially designed urethane flex end allows some misalignment during articulation while restricting excess movement at highway speeds to retain control and handling. Learn More

Replacement TeraFlex TJ: Track Bar Joint. Right-hand thread. Features a forged zinc plated housing with a small rubber bushing as well as an additional rate for superior stiffness. Learn More

Designed their Rear Track Bar Bracket Kit in order to correct vehicle roll center, restore factory handling, and reduce body roll on 2-door or 4-door Jeep Wrangler JLs lifted 2.5-4". This bolt-on bracket mounts to the rear axle and multiple mounting holes allow for neutral lateral alignment of the rear axle. Learn More

Our Heavy-Duty Forged Adjustable Front Track Bar is 230% stronger than the stock piece making it the strongest track bar on the market! Learn More

This bracket is designed for applications where the frame side of the trackbar needs to be lowered. It is used specifically with the High Steer Kit when a trackbar is still retained (i.e. PRO-LCG) and with 5+” of suspension lift. Must use with 1743070 trackbar. Fits all TJ Wrangler models including the Rubicon and Unlimited. Details: For use on lifts 5" and over Needed when using LCG track bar 1743070 Learn More

The TeraFlex JK / JKU 2.5” PERFORMANCE SPACER LIFT REAR TRACK BAR FRAME BRACKET KIT restores the track bar to its natural position without binding or interference with other components on JK Wrangler and JKU Wrangler Unlimited models with a 2.5” PERFORMANCE SPACER LIFT KIT. FITS: • JK Wrangler (2-door) • JKU Wrangler Unlimited (4-door) SPECS: • LIFT HEIGHT: 2.5” FEATURES & BENEFITS: • Mounts to the upper track bar frame mounting points • Bolt-on installation – no... Read More Learn More