TeraFlex

The TeraFlex JK HD frame brace and trackbar drop bracket kit strengthens the frame to reduce front end shimmy or excess frame movement, and also provides a lowered front trackbar mount. This kit is designed to work with 4+" of lift, and must be used with a drag link flip kit for correct steering geometry.Fits all JK Wrangler models including Rubicon & Unlimited. Welding is required for installation. Learn More

TeraFlex JK Front Upper Bump Stop Extensions are designed to retain the factory microcellular bump stop to progressively absorb impact. Upper bump stop extensions are designed to “pop-in” to the factory bump stop tower for a simple installation. This bump stop extends the effective bump stop length by 2.75". Proper bump stop length is critical to prevent damage to suspension components, shock absorbers, and fenders. EXTENSION HEIGHT: 2.75” • Fits all JK 2-Door Wrangler and JKU... Read More Learn More

The TeraFlex hand throttle kit is designed to provide constant idle or speed when off-roading. It is especially useful when use of clutch, gas and brake are needed together. The hand throttle is designed for off-road use only and is not intended to be used as a ‘cruise control’ device. Details: Manual transmission only Off-road use only Learn More

2007-18 Jeep Wrangler JK 2 Door & Unlimited 4 Door * 5X5.5 BOLT PATTERN (NOT OEM BOLT PATTERN) The TeraFlex JK heavy duty adjustable tire carrier kit is designed to carry up to a 37” tire over the most extreme trails and obstacles, and provide easy and immediate access to the rear cargo area with a one-handed single action. The heavy duty adjustable tire mount is designed to support the additional weight of a full size spare (up to a 37" tire) by securely mounting the tire to the Teraflex... Read More Learn More

The heavy-duty Alpha Hi-Lift Jack Mount provides a safe, quiet, and secure mounting point for a Hi-Lift Jack. The 3/16”-thick laser cut and powder coated bracket bolts to the JK Alpha HD Hinged Spare Tire Carrier for unshakable stability. Learn More

**If using a stock wheel, a wheel spacer #1055005 is required due to the extra thickness of the hinge carrier** The TeraFlex Heavy Duty Adjustable Tire Carrier spreads the load and weight of the tire to more than just one hinge point. Incorporating and using the factory tailgate hinge mounting points spread and separate the load as far apart as possible, resulting in maximum strength and durability. Learn More

Reduces bump steer, front end shimmy, and/or wobble in modified Wrangler models with lifted suspension systems and larger off-road tires. This stabilizer is superior to the factory unit and meets the additional demands and stresses of a modified off-road Jeep. Learn More

The TeraFlex JK/JKU Heavy-Duty Drag Link Kit & Heavy-Duty Tie Rod Kit is designed for extreme conditions that typically cause factory steering components to bend and fail on JK Wrangler and JKU Wrangler Unlimited models. Learn More

TeraFlex Flex Ends will allow some misalignment when articulating, and have a specially designed urethane bushing to restrict excess movement and allow control and handling at highway speeds. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

When a quiet street ride and vibration free driving are required, the rubber bushing ends will give you the feel you want. The rubber bushing will provide the most noise and vibration dampening characteristics possible. This end can also be used as a replacement for any control arm utilizing a 1-1/4” x 12 tpi. ‘heim’ type rod end. Uses a 9/16” bolt. LEFT Hand Thread. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More