TeraFlex

When a quiet street ride and vibration free driving are required, the rubber bushing ends will give you the feel you want. The rubber bushing will provide the most noise and vibration dampening characteristics possible. This end can also be used as a replacement for any control arm utilizing a 1-1/4” x 12 tpi. ‘heim’ type rod end. Uses a 9/16” bolt. RIGHT Hand Thread. Details: Right hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

Proper bumpstop length is critical to prevent damage to suspension components, shock absorbers, and fenders. This bumpstop kit features an integrated spring retainer pin to keep the coil spring seated. Fits all TJ Wrangler models including Rubicon & Unlimited. Details: Rear Lower Includes hardware Learn More

TeraFlex is the only company which features adjustable anti-squat! The heavy duty rear four-link upper suspension truss properly locates the axle under the vehicle and is designed to withstand the high torque loads that get transferred to the suspension points. Learn More

The replacement 3/4” Lower Stud Kit includes all of the pieces required to replace missing or worn components for your Front Sway Bar Quick Disconnect Kit. • Diameter: 3/4" • Thread: 1/2" X 20 Learn More

Replacement Lower QD Pin - 5/8" Replacement part. To be used with part numbers 1743092 and 1743090. Learn More

The wheel adapter will provide a 1.25 offset for factory wheels for additional tire clearance when turning. The wheel spacer is not intended for wheels wider than 8 or aftermarket wheels with less than 4 of backspacing. 5x4.5 bolt pattern. Sold as a pair. Note: Also fits the TJ Wrangler Unlimited, YJ Wrangler, XJ Cherokee, MJ Comanche, and ZJ Grand Cherokee. Details: 5 on 4.5 bolt pattern 1.25 inch thick Sold as a pair Fits: 84-01 Jeep Cherokee (XJ) 93-98 Jeep Grand Cherokee (ZJ) ... Read More Learn More

The TeraFlex FlexArm joint rebuild kit includes all required replacement components to rebuild a TeraFlex FlexArm joint. Depending on vehicle driving condtions, grit, grime, dust and fluids all take their toll on the tolerances of the bushings. To keep the joint functioning correctly it is necessary to rebuild the joint periodically and restore the joint to top working condition. This kit includes a chrome plated misalignment ball, two urethane bushings, large retainer washer, and snap ring. Learn More

Front SpeedBump Bracket Kit For 1997-06 Jeep Wrangler TJ & TJ Unlimited Models SpeedBump Mounting Bracket For Use w/Front SpeedBump Kit The TeraFlex TJ SpeedBump front bracket kit will allow you to mount a SpeedBump bumpstop to a TJ Wrangler. This kit includes two front brackets. Cutting and welding is required. SpeedBump bumpstops and spring isolators are sold separately. Learn More

Rear Trackbar Mounting Bracket For 1997-06 Jeep Wrangler TJ & TJ Unlimited Models Trackbar Mounting Bracket Rear Axle Relocates Mounting Point To Allow Lift Replaces Weaker Factory Mounts The TeraFlex TJ rear axle bracket trackbar mount is precision laser cut from 3/16” steel and accurately formed to ensure proper positioning for correct suspension geometry. Item is sold in raw steel and is ready for welding and paint or powder coating. This kit includes one trackbar mount and is designed... Read More Learn More