TeraFlex

TeraFlex TJ/LJ | ZJ | XJ Adjustable Front Track Bar Kit to fine tune your front suspension and eliminate bump steer. The track bar bushing adds adjustability, improves durability, and reduces the effects of front wheel shimmy. Learn More

The TeraFlex HD30 differential covers are designed to offer extreme protection from rocks, obstacles and other debris on the trail. The TeraFlex differential covers are more than 3/8in. thick. Details: For Use On Dana 25/27/30 Front Axles Cast From Thick Nodular Iron Black Powder Coat Finish Recessed Bolt Holes Equipped With Filler And Drain Plugs. Learn More

These TeraFlex TJ/LJ Heavy-Duty Large Taper Tie Rod Ends utilize a one-ton joint end and a large taper rod end to fit a standard Dana 60 front axle or a Tera CRD60 axle. Learn More

The TeraFlex TJ high steer trackbar kit is designed to be used in conjunction with our high steer kit. This kit will allow you to fine tune the drag link & trackbar angles to eliminate and correct bumpsteer or other front end issues. The kit includes an upper frame bracket, lower axle bracket, and adjustable trackbar. Both brackets feature multiple mounting holes to fine tune for lift height and trackbar position. This kit is designed to put the trackbar parallel with the drag link. This kit... Read More Learn More

The angled rod end forging is designed for applications needing additional clearance for tires, or other frame configurations. The Flex joint ends provide excellent off-road capabilities with articulation and durability. They dampen road noise and vibration. The forging uses standard 1-1/4” x 12 tpi. with a 9/16” center bolt. 10 degree angle off joint. Used on our JK Lower Control Arms for better Tire clearance in tight turns. Shoulder width= 2-5/8” Bolt dia.= 9/16” [14mm] Shank angle =... Read More Learn More

Large Rod End Field Repair Tool This repair tool will make joint rebuilding in the field as simple as it gets. This in fact is the same tool that we use in house to rebuild joints. The repair tool is easy to use with two open end wrenches, or sockets. Learn More

The TeraFlex is designed as an upgrade to a current suspension system. You get the same advantage and benefits of a long arm system without all of the cost from purchasing parts that you already own and have installed. *The Long Arm Upgrade Kit comes with all frame brackets, upper and lower long flexarms, and necessary hardware. Track bar brackets, and adjustable track bars are not included, but can be ordered separately. Details: Pro LCG Long Arm Bracket Kit Only For Use w/Lower... Read More Learn More

The medium spherical urethane Monster end uses the same internals as its larger brother, in a scaled down version. The end utilizes a 7/8” x 18 tpi. shank and accepts a 7/16” bolt. Details: Right hand thread 2" shoulder width 7/8" x 18 TPI shank Accepts 7/16" bolt Shoulder Width = 2" Bolt Diameter = 12mm 7/8-18 UNS thread 1 1/4" wrench on jam nut Learn More

Fits TJ Wranglers (‘97-newer) with minimum 3” lift. Requires use of a TeraFlex rear track bar bracket if using adjustable control arms for SYE, or up to 6" lift. 1944000 Learn More

The TeraFlex TJ rear axle bracket kit includes all axle brackets necessary for a complete TJ rear end. The brackets are precision laser cut from 3/16” steel and accurately formed to ensure proper positioning for correct suspension geometry. Sold as a complete kit, raw steel is ready for welding and paint or powder coating. This kit includes two lower coil spring pads, two lower control mounts, two upper control arm mounts, two shock mounts, two swaybar link mounts, and a trackbar mount. *... Read More Learn More