TeraFlex

The TeraFlex hand throttle kit is designed to provide constant idle or speed when off-roading. It is especially useful when use of clutch, gas and brake are needed together. The hand throttle is designed for off-road use only and is not intended to be used as a ‘cruise control’ device. Details: Manual transmission only Off-road use only Learn More

TeraFlex Flex Ends will allow some misalignment when articulating, and have a specially designed urethane bushing to restrict excess movement and allow control and handling at highway speeds. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

Used as replacement in Teraflex 1615700 Monster Lower FlexArms for 84-06 Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ & WJ, Wrangler TJ & Unlimited Details: Right hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

When a quiet street ride and vibration free driving are required, the rubber bushing ends will give you the feel you want. The rubber bushing will provide the most noise and vibration dampening characteristics possible. This end can also be used as a replacement for any control arm utilizing a 1-1/4” x 12 tpi. ‘heim’ type rod end. Uses a 9/16” bolt. LEFT Hand Thread. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

These universal leaf spring mounting plates will allow you to attach leaf springs to custom axles, or to rebuild your stock application. The plates will work with all rear axles, including stock Jeep, Dana 44 & 60. Sold in pairs. Details: Leaf Spring Plates Universal Fit Sold As: Pair Learn More

The angled rod end forging is designed for applications needing additional clearance for tires, or other frame configurations. The end utilizes a 7/8” x 18 tpi. shank and accepts a 9/16” bolt. The TJ Wrangler version features a 2" wide shoulder width while the JK version comes with a standard 2-5/16" shoulder width. Details: Right hand thread 9 degree angle 2-5/16" shoulder width 7/8" x 18 TPI shank Accepts 9/16" bolt Learn More

Rod End Rebuild Kit Medium Rod End rebuild kits include 2 bushings, 1 chrome ball, 1 retaining washer and 1 snap ring. A rebuild tool is required. part # 1951350 Learn More

Trackbar Medium Rod End Field Repair Tool This repair tool will make joint rebuilding in the field as simple as it gets. This in fact is the same tool that we use in house to rebuild joints. The repair tool is easy to use with two open end wrenches, or sockets. Learn More

The TeraFlex Trail Recovery Kit comes with all the essential recovery tools needed for the most common pulling tasks packed in our heavy-duty tool & gear bag. This kit is a bargain compared to buying each item separately. Don’t go out on any trail without this essential recovery kit in the back of your Jeep®! INCLUDES: • 30’x2” Recovery Tow Strap w/ 20,000-lb. rating (# 4800100) • 7’x3” Recovery Tree Strap w/ a 20,000-lb. rating (# 4800100) • two (2) D-Ring Shackles... Read More Learn More

This Lower Ball Joint Preload Adjustment Tool is designed for ball joints with a threaded top cap to adjust preload and a lateral grease fitting. Fits ball joints sold AFTER August 2017. Learn More