Viair Ultra-Light Duty Onboard Air System For Air Horns & Air Lockers 10000

SKU
VA-10000
We Price Match
Ultra Light Duty Onboard Air System can be used to pressurize the included 1.0 gallon air tank for air horn use, off road air locking differential use, and a host of other light duty pneumatic needs. While not intended to inflate tires, this onboard air system provides a reliable smaller volume, in a cost effective package.

Please Note:
Use thread sealant for proper installation.
Teflon tape is not recommended.
Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.

Included Parts:
- 1.0 Gallon VIAIR Air Tank
- 98C VIAIR Air Compressor
- Omega Bracket with Mounting Hardware
- Pressure Switch (85 PSI on, 105 PSI off)
- 40-amp Relay
- 145 PSI Safety Valve
- T-Fitting: 1/4” (M) x 1/4" (F) x 1/8” (F)
- T-Fitting: 1/4” (M) x 1/4" (F) x 1/4” (F)
- 1/4” Drain Cock
- 1/4” Compression Fitting
- 1/4” Plug (M)
- (2) 1/4” (M) NPT to 1/8” (F) BSP
- 20ft. 12 Gauge Wire with Inline Fuse Holder
- Accessory Airline
- Electrical Connections

Specifications
- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 10% @ 100 PSI
- Max. Working Pressure: 105 PSI
- Max. Amp Draw: 13 Amps
- Ingress Protection Rating: IP54
Special Price $211.96 Regular Price $264.95
Viair 10000

Ultra Light Duty Onboard Air System can be used to pressurize the included 1.0 gallon air tank for air horn use, off road air locking differential use, and a host of other light duty pneumatic needs. While not intended to inflate tires, this onboard air system provides a reliable smaller volume, in a cost effective package.

Please Note:
Use thread sealant for proper installation.
Teflon tape is not recommended.
Properly sealed, recommended torque for 1/8" is 10 ~ 11 ft. lbs. Recommended torque for 1/4" and 3/8" is 16 ~ 18 ft. lbs.

Included Parts:
- 1.0 Gallon VIAIR Air Tank
- 98C VIAIR Air Compressor
- Omega Bracket with Mounting Hardware
- Pressure Switch (85 PSI on, 105 PSI off)
- 40-amp Relay
- 145 PSI Safety Valve
- T-Fitting: 1/4” (M) x 1/4" (F) x 1/8” (F)
- T-Fitting: 1/4” (M) x 1/4" (F) x 1/4” (F)
- 1/4” Drain Cock
- 1/4” Compression Fitting
- 1/4” Plug (M)
- (2) 1/4” (M) NPT to 1/8” (F) BSP
- 20ft. 12 Gauge Wire with Inline Fuse Holder
- Accessory Airline
- Electrical Connections

Specifications
- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 10% @ 100 PSI
- Max. Working Pressure: 105 PSI
- Max. Amp Draw: 13 Amps
- Ingress Protection Rating: IP54
More Information
Searchable Sku10000
ManufacturerViair

Buy Viair Ultra-Light Duty Onboard Air System For Air Horns & Air Lockers 10000 for $192.04