Specifications:

Simple, plug-in installation – Tazer JL Lite simply plugs in, in place of your SGW module. Supports 2018+ Wrangler JL and Jeep Gladiator

Features are all accessed using the dash display, using steering wheel buttons to navigate the menus.

Tazer JL Lite features can be broken into two categories;

Vehicle Settings – which are changes made to the Jeep-like tire size, gear ratios,
or change settings to accommodate other upgrades or modifications. These
changes will continue to operate after the Tazer JL Lite is unplugged.

Live Functions – which are functions the Tazer JL Lite performs live, only while
plugged in.

Vehicle Settings:
– Change Tire Size
– Change Gear Ratio
– Change Transfer case LOW ratio
– Enable/Disable TPMS system
– Change TPMS pressure warning limit front/rear (25psi-85psi)
– One-touch return-to-stock – Quick “unmarry” function returns all vehicle settings back to
stock.

Live Functions:
– AutoStopStart disable – remembers the last state of the auto stop-start system and will set it for
you the next time you start the vehicle
– AutoTracKill – remembers the last state of the traction control system and will set it for you the next
the time you start the vehicle
– Can disconnect sway bar in 2WD up to 30mph
– Light Show mode – 6 preset and 3 make-your-own Light shows that flashes all the exterior
lights, perfect for car shows/first responders/off-road visibility. Control from Key Fob or
steering wheel buttons. Can be enabled for in-motion use for parades, off-road and legal
police/EMS.
– Cooldown mode: Turn engine fans on-demand when the ignition is on, engine not running
– Line Lock: Can lock front brakes for an easy burnout
– Rock Crawl: Can lock all four brakes by pressing steering wheel buttons to hold the vehicle
still, especially helpful when off-road.
– Winch Mode: Raise idle to 2000 RPM with a simple button press.
– Display DTC’s – Shows the diagnostic codes that are making the check engine light come on.
– Clear CELs – Reset that pesky check engine light. Good when you have mods that set the
light and you know exactly why.
– 0 to 30 and 0 to 60 Timers – Displays 0-30 or 0-60 times on EVIC display
– Firmware updates – the new firmware is available periodically, always free!

Can be upgraded any time via USB by purchasing an activation key, to the full Tazer JL/Tazer JL Mini feature set.

 

Fitment:

2018+ Jeep Wrangler JL Unlimited 4 Door Models
2018+ Jeep Wrangler JL
2020+ Jeep Gladiator JT

WORKS ON ALL VARIANTS OF THE JEEP WRANGLER AND GLADIATOR – Diesel, 392 and 4XE included!

 

Features:

Simple, plug-in installation – Tazer JL Lite simply plugs in, in place of your SGW module. Supports 2018+ Wrangler JL and Jeep Gladiator
All engine and transmission variations supported, including export models.

Features are all accessed using the dash display, using steering wheel buttons to navigate the menus.

Tazer JL Lite features can be broken into three categories:

Vehicle Settings are accessed with the engine OFF and the ignition in the “RUN” position. These are changes made to the Jeep such as tire size, gear ratios or settings which accommodate other upgrades. These changes will continue to operate after the Tazer JL Lite is unplugged.

Live Functions are accessed with the engine ON. These are operations the Tazer JL Lite performs live, only while it is physically connected.
plugged in.

“Non-Menu” Live Functions are not located in a menu. They are activated automatically or with a steering wheel button combination. These are operations the Tazer JL Lite performs live, only while it is physically connected.


List of Vehicle Settings:
Light Show – 6 preset and 3 make-your-own light shows that flash all the exterior lights – perfect for car shows/first responders/off-road visibility – controlled from key fob or steering wheel buttons – can be enabled in-motion for use in parades, off-road and for legal police/EMS applications (contact support for more info)
read and clear DTCs system-wide or in specific modules
change tire size
change gear ratio (max 4.11 on 4XE)
change Transfer Case LOW ratio
enable/disable TPMS system
set TPMS pressure warning limit, front and rear, between 25psi and 85psi
one-touch return-to-stock – quick “Unmarry” function returns to stock

List of Live Functions:
activate Light Show
define Winch Mode RPM (excl. 4XE)
flash lights to indicate tire pressure while filling
Dark Mode – turn off all exterior lighting and dash/radio/shifter lights while parked with the engine running
activate and cycle through camera inputs
display Vacuum/Boost Gauge
activate 0-30 timer
activate 0-60 timer

List of “Non-Menu” Live Functions:
AutoStopStart Disable – Tazer JL Lite will automatically remember the last state of the auto stop/start system and set it for you the next time you start the vehicle
disconnect sway bar in 2WD up to 30mph
Cooldown Mode – turn on engine fans on-demand
Winch Mode – raise idle RPM to user-selected value between 1250 and 2000 (excl. 4XE)
Line Lock – lock the front brakes for an easy burnout
Rock Crawl – lock all four brakes with a steering wheel button combo to hold the vehicle still, especially helpful when off-road (excl. 4XE)
lock all four brakes in park to anchor Jeep (shortcut) (excl. 4XE)
partial reboot

Can be upgraded any time via USB by purchasing an activation key, to the full Tazer JL/Tazer JL Mini feature set.