Steering - Upgrades

Tera has developed heavy duty tie rod ends that utilize a one-ton joint end, and are available in either a stock Jeep taper or a large one-ton taper (standard Dana 60). The stock taper rod ends will fit Dana 30 knuckle holes. The large taper will fit the larger 60 type knuckles, as are used in Tera"™s HD axle line. Additionally the tie rod ends are available with an offset (for use with applications where differential interference may occur with the tie rod). Details: Left hand thread Small... Read More Learn More

The TeraFlex Dana 30 High Steer Knuckle replaces the outer knuckle on the passenger"™s side with a new high steer knuckle. The knuckle features tapered inserts that make customizing easy by allowing the drag link (knuckle end) to enter from the top or the bottom of the steering arm. The tapered sleeves are available for the drag link to fit stock taper rod ends, or the large taper rod ends (standard Dana 60). The new one-piece knuckle raises the steering arm position to correct the steering... Read More Learn More

Upgrade your stock steering system with the TeraFlex TJ: High Steer HD Aluminum Drag Link Kit. The High Steer HD Aluminum Drag Link and Tie Rod (NOT INCLUDED) can be used to convert the TJ’s stock steering to a cross steering or a flipped steering setup. Learn More

These TeraFlex TJ/LJ Heavy-Duty Large Taper Tie Rod Ends utilize a one-ton joint end and a large taper rod end to fit a standard Dana 60 front axle or a Tera CRD60 axle. Learn More

The newest addition to the TeraFlex High Steer system will allow the tie rod to be 'flipped' over the knuckle to increase ground clearance and provide additional protection for the tie-rod. Owners of The TeraFlex High Steer Kit can upgrade to the new 'flip' kit providing them an additional 3" of tie rod clearance. This upgrade kit comes with 2 low profile tie rod ends, 1 low profile drag link end, and 3 tapered sleeves. This kit does require drilling the driver side knuckle taper to a 3/4"... Read More Learn More

The TeraFlex TJ high steer trackbar is designed to be used in conjunction with our high steer kit. This kit will allow you to fine tune the drag link & trackbar angles to eliminate and correct bumpsteer or other front end issues. Note: this trackbar must be used with additional bracketry for proper steering geometry. The TJ frame trackbar drop bracket (#1743031), and the raised axle trackbar bracket (#1943070) are required to mount this trackbar to a TJ with a high steer... Read More Learn More