TeraFlex

These tabs make it easy to replace or improve the factory control arm mounts. Sold as 1 single piece. Details: Weld on Fits 3" O.D. tubing 1/4" thick Sold individually Learn More

The drop pitman or steering arm is used to correct steering geometry on vehicles with 4 or more inches of lift. Fits all Wrangler models - YJ & TJ including Rubicon and Unlimited. Learn More

FlexArm, Long Upper, Front (PRO LCG), Monster Style Min Length = 22-1/2" Max Length = 24 7/8" Uses 7/16" [12mm] Bolt 7/8-18 UNS Thread 1 1/8" Wrench On Tube 1 1/4" Wrench On Jam Nut Details: Front Upper Adjustable Monster Flex Control Arms Greasable Monster Flex Joints Finish: Black Powder Coated Sold As: Pair Learn More

TeraFlex Quick Disconnects are the leader in the industry. Spherical polyurethane bushings eliminate noise and avoid metal-to-metal wear and tear. The design combines silent function with ease of use. Details: Front 0-2" lift Learn More

The TeraFlex hand throttle kit is designed to provide constant idle or speed when off-roading. It is especially useful when use of clutch, gas and brake are needed together. The hand throttle is designed for off-road use only and is not intended to be used as a ‘cruise control’ device. Details: Manual transmission only Off-road use only Learn More

Tera has developed heavy duty tie rod ends that utilize a one-ton joint end, and are available in either a stock Jeep taper or a large one-ton taper (standard Dana 60). The stock taper rod ends will fit Dana 30 knuckle holes. The large taper will fit the larger 60 type knuckles, as are used in Tera"™s HD axle line. Additionally the tie rod ends are available with an offset (for use with applications where differential interference may occur with the tie rod). Details: Right hand thread Small... Read More Learn More

Reduces bump steer, front end shimmy, and/or wobble in modified Wrangler models with lifted suspension systems and larger off-road tires. This stabilizer is superior to the factory unit and meets the additional demands and stresses of a modified off-road Jeep. Learn More

The TeraFlex TJ/LJ 5”+ Lift Pro LCG Front Track Bar is designed for TJ Wrangler and LJ Wrangler Unlimited models with 5” or more lift. Learn More

TeraFlex Flex Ends will allow some misalignment when articulating, and have a specially designed urethane bushing to restrict excess movement and allow control and handling at highway speeds. Details: Left hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More

Used as replacement in Teraflex 1615700 Monster Lower FlexArms for 84-06 Jeep Cherokee XJ, Comanche MJ, Grand Cherokee ZJ & WJ, Wrangler TJ & Unlimited Details: Right hand thread 2-5/8" shoulder width 1-1/4" x 12 TPI shank Accepts 9/16" bolt Learn More