TeraFlex

The TeraFlex JK bolt on D-Ring mount kit is designed as a universal recovery point, and bolts directly to the front JK frame. The kit comes with the D-Ring mount, and hardware. D-Ring shackles are sold separately. Details: Fits the outside of many aftermarket bumpers Bare steel No drilling required for JK Applications Mounting Pattern Height 64.42mm/ 2.52in. Mounting Pattern Width 134.1mm/5.28in. Mouning Plate Height 100mm/3.93in. Learn More

The TeraFlex JKU 4-Door Aluminum Rock Slider Kit protects the lower side of your JKU Wrangler Unlimited. Learn More

The TeraFlex license plate mount kit will relocate your license plate from it’s vulnerable stock location to your spare tire. This kit includes the licesne plate bracket, and all necessary hardware (does not include lug nut mounting studs). Note: Most states require the license plate to be illuminated at night. This bracket does not include any license plate illumination lights. Details: No lug nuts included Learn More

Proper final bumpstop length is critical to prevent bottoming out of your shocks, or tires into your fenders. These bumpstop pads allow you to fine tune your final bumpstop length. Details: SpeedBump Bumpstop Pad Kit Strike Pair Learn More

TeraFlex SpeedBumps are an innovative composite bumpstop system designed for high-speed, high-performance JK Wrangler applications. The maintenance free, performance tuned microcellular polyurethane technology provides a simple installation with no further adjustment or tuning required for a lifetime of dedicated off road use. These kits include Speedbumps ONLY and No Extra Extended Bump Stops. Includes 4 SpeedBumps for the entire vehicle. TeraFlex SpeedBumps are an innovative composite... Read More Learn More

Protect one of the most vulnerable components on your Wrangler. Each kit comes with all the hardware necessary for installation and can be used with stock and most aftermarket bumpers. Fits all TJ Wrangler models including Rubicon and Unlimited. Details: Protects one of the most vulnerable components of your Jeep Drilling of 1 hole required Learn More

Raise the swaybar mount up and out of the way to make clearance for custom steering components. The mount is laser cut and formed from 3/8” steel for durability and strength. Dana 30 Left mount. Details: Dana 30 Left hand side Learn More

Raise the swaybar mount up and out of the way to make clearance for custom steering components. The mount is laser cut and formed from 3/8” steel for durability and strength. Dana 30 Right Mount. Details: Dana 30 Right hand side Learn More

These air deflators are a must have for any trail vehicle. Airing down your tires increases traction and handling when off-road, but can take forever when you are in a hurry. These air deflators make the job easier so you can get out onto the trail. A key chain ring keeps them close at hand. Constructed of zinc plated steel for durability. Details: Universal application Quickly deflates tires for off roading Zinc plated steel Learn More

Replacement TeraFlex TJ: Track Bar Joint. Right-hand thread. The specially designed urethane flex end allows some misalignment during articulation while restricting excess movement at highway speeds to retain control and handling. Learn More