TeraFlex

These TeraFlex TJ/LJ Heavy-Duty Large Taper Tie Rod Ends utilize a one-ton joint end and a large taper rod end to fit a standard Dana 60 front axle or a Tera CRD60 axle. Learn More

The TeraFlex Dodge 1-Ton Large Taper Insert Sleeve is used for mounting tie rod ends in steering conversions such as our TJ High Steer Kits (# 1849000 or # 1813000). This tapered insert matches a factory Dodge Dana 60 taper and requires an 0.875" O.D. hole. Learn More

Tera has developed heavy duty tie rod ends that utilize a one-ton joint end, and are available in either a stock Jeep taper or a large one-ton taper (standard Dana 60). The stock taper rod ends will fit Dana 30 knuckle holes. The large taper will fit the larger 60 type knuckles, as are used in Tera"™s HD axle line. Additionally the tie rod ends are available with an offset (for use with applications where differential interference may occur with the tie rod). Details: Left hand thread Small... Read More Learn More

The TeraFlex high steer system was originally designed to be used with our top of the line suspension system- the MAX-LCG, which utlilizes a front 4-link triangulation (eliminating the trackbar). The High Steer Kit is essential in that application. We found that many Jeeps with more than 4" of lift while still utilizing a trackbar system would benefit from a high steer solution. This kit will beef up the essential steering components of your Dana 30 front axle. The system includes a HD tie rod... Read More Learn More

The TeraFlex TJ: Pro LCG Dana 30/44 High Steer System addresses many front-end steering issues associated with lifted TJ Wrangler/Unlimited models. Beefs up steering components, maximizes ground clearance, and corrects steering geometry. Learn More

Tera has developed heavy duty tie rod ends that utilize a one-ton joint end, and are available in either a stock Jeep taper or a large one-ton taper (standard Dana 60). The stock taper rod ends will fit Dana 30 knuckle holes. The large taper will fit the larger 60 type knuckles, as are used in Tera"™s HD axle line. Additionally the tie rod ends are available with an offset (for use with applications where differential interference may occur with the tie rod). Details: Right hand thread Small... Read More Learn More

The TeraFlex Dana 30 High Steer Knuckle replaces the outer knuckle on the passenger"™s side with a new high steer knuckle. The knuckle features tapered inserts that make customizing easy by allowing the drag link (knuckle end) to enter from the top or the bottom of the steering arm. The tapered sleeves are available for the drag link to fit stock taper rod ends, or the large taper rod ends (standard Dana 60). The new one-piece knuckle raises the steering arm position to correct the steering... Read More Learn More

Upgrade your stock steering system with the TeraFlex TJ: High Steer HD Aluminum Tie Rod Kit. The High Steer HD Aluminum Drag Link (NOT INCLUDED) and Tie Rod can be used to convert the TJ’s stock steering to a cross steering or a flipped steering setup. Learn More

Upgrade your stock steering system with the TeraFlex TJ: High Steer HD Aluminum Drag Link Kit. The High Steer HD Aluminum Drag Link and Tie Rod (NOT INCLUDED) can be used to convert the TJ’s stock steering to a cross steering or a flipped steering setup. Learn More

The newest addition to the TeraFlex High Steer system will allow the tie rod to be 'flipped' over the knuckle to increase ground clearance and provide additional protection for the tie-rod. Owners of The TeraFlex High Steer Kit can upgrade to the new 'flip' kit providing them an additional 3" of tie rod clearance. This upgrade kit comes with 2 low profile tie rod ends, 1 low profile drag link end, and 3 tapered sleeves. This kit does require drilling the driver side knuckle taper to a 3/4"... Read More Learn More